OPERATION MANUAL

• Wheninstalling,removingormovingthemonitor,ensurethatthisiscarriedoutbyatleast4people.

• Besuretouseawall-mountbracketdesignedordesignatedformountingthemonitor.

• Thismonitorisdesignedtobeinstalledonaconcretewallorpillar.Reinforcedworkmightbenecessaryforsomematerials

such as plaster / thin plastic board / wood before starting installation.

• Thismonitorandbracketmustbeinstalledonawallwhichcanendureatleast4timesormoretheweightofthemonitor.

Install by the most suitable method for the material and the structure.

• ToattachaVESA-compliantmountingbracket,useM8screwsthatare3/8inch(10mm)to1/2inch(12mm)(PN-65HC1:

9/16 inch (15mm)) longer than the thickness of the mounting bracket.

Screws (M8)

Mounting bracket

Monitor mounting

3/8 - 1/2 inch (10 - 12 mm)

(PN-65HC1: 3/8 - 9/16 inch (10 - 15mm))

• Donotuseanimpactdriver.

• Whenmovingthemonitor,besuretoholdthehandlesorthepartsmarkedby

below. Do not grasp the screen or tray.

This may cause product damage, failure, or injury.

[PN-86HC1] [PN-75HC1] [PN-65HC1]

• Ifyouneedtotemporarilyplacethemonitoronatableorothersurfaceduringinstallation,spreadathicksoftclothonthe

table to prevent damage to the screen and table.

• Priortorepackingorremoval,removethetray.

• Aftermounting,pleasecarefullyensurethemonitorissecure,andnotabletocomeloosefromthewallormount.

• Donotuseanyscrewholesotherthanthoseformountingbrackets,locatedontherearofthemonitor,forinstallation.

Mounting Precautions

(For SHARP dealers and service engineers)