Supplementary Information for Operation Manual

15
1. If the firmware update is completed successfully, the
screen on the right will be displayed.
2. When the firmware update is completed successfully,
the screen on the right will appear. If you do not have
an Internet connection, an error message will appear,
but please continue to the next step.
3. After the initial settings are complete, check to see if
the firmware version is up to date.
(If the update is not completed successfully)
4. If the screen shown in (4) is displayed, the update has
not been completed successfully. If this screen
appears, turn off the main power of PN-CD701 as it is,
and then turn it back on after at least 5 seconds. The
firmware update will be performed again.
(1) Initial startup screen after the update is
successfully completed
(2) Error message when no Internet
connection is available
(3) Device information display (4) Update failure image
5. Notes on updating firmware
15