Specifications

PH TESTER
CHAMP PH TESTER: An economical pH pocket
tester with manual 1 point calibration, Range: 0.0
to 14.0 pH and Accuracy: ±0.2 pH. The Champ is
a combination of an electrode with an LCD
where the measurement is displayed.
pHep: An economical pH pocket tester with a
Range: 0.0 to 14.0 pH, Accuracy: ±0.1 pH and a
manual 1 point calibration.
pHep+: Combines the pHep's characteristics
with automatic temperature compensation (ATC)
and calibration at 2 points. ATC measures the tempera-
ture of the sample and compensates the pH reading rela-
tive to the temperature of the pH bulb. Precision is in-
creased by this feature even in quick measurements
.
All the above are rated for battery use of 150 hours con-
tinuous use.
Code: PH-C Champ pH Tester
PH-P pHep pH Tester
PH-PP pHep + pH Tester
pH Testing
PH-FIX INDICATOR STICKS
Measurement of pH value is possible
even in unbuffered or very weakly
buffered solutions. pH sticks can be
left in the solution until the final color
is completed. 0-6.0 range.
Code: pH pH Strips 100/box
ALCOHOL TESTER
The Alcohol Tester uses temperature compensated
plastic balls which are compounded to allow for the
presence of etch and gum arabic, and cover the alcohol
range from slightly above the optimum 25% by volume
down to 0%. The Alcohol Tester is effective over a
temperature range of 40º F to 90º F.
Code: AT-1
CONDUCTIVITY TESTER
DIST3 AND DIST4: An affordable pocket tester
that ensures precise EC and TDS readings.
Simply immerse the tester in the solution and
the reading will be clearly displayed. The DIST3
and DIST4 read in µS/cm. Automatic tempera-
ture compensation ensures correct readings.
The digital display allows the operator to see the
readings from every angle. Calibration is very
simple to perform: immerse the tester in the cali-
bration solution and adjust the trimmer on the
rear of the meter until the correct value is dis-
played
.
Dist3 Dist4
Range 1990 µS/cm 19900 µS/cm
Resolution 10 µS/cm 100 µS/cm
The below specifications apply to both models:
Accuracy ±2% F.S.
Calibration manual, 1 point, through trimmer
Temp. Comp automatic, 5 to 50°C (41 to 122°F)
Battery Type / Life 4 x 1.5V / approx. 150 hours of
continuous use
Code: DIST3 1990 µS/cm
DIST4 19900 µS/cm
CALIBRATION/BUFFER SOLUTIONS
Solutions for the calibration of pH and conductivity me-
ters. All solutions certified NIST Standard. All come in
230 ml bottle.
Code: pH4 pH Buffer Solution 4.01
pH7 pH Buffer Solution 7.01
DISTC
1413 µS/cm Calibration Solution
13