Specifications

3 Spindle Paper Drills
FP-IV Auto 3 Spindle Electric Paper Drill
The FP-IV–Auto Paper Drill is a high capacity 3-hole drill with a paper ca-
pacity of 4” or approximately 1,000 sheets of 20 lb bond.
The center head is fixed and the outer two heads are adjustable from 2
1/4” to 4 3/4”. The table has self centering guides for placement of paper.
Paper size ranges from 3 1/2” to 17” wide. Back margin is adjustable up to
a 3 1/2” depth. Table size is 18 1/4” x 14 3/8”. Paper drills are available
from 1/8” (3 mm) to 3/8” (9 mm) in diameter.
The FP-IV-Auto is equipped with a moving table that has two stop bars.
The first stop bar has adjustable stops so that if drilling jobs with more than
3 holes, this can be set up to accommodate these jobs. The prepro-
grammed bar has settings for two stops (6 hole) and 12 stops (36 hole).
The FP-IV-Auto has a unique design. The belt driven spindles are powered
by three 1/4 horse power motors. The up and down movement of the head
is driven by a 3/4 horse power electric motor. Heads are activated by two
safety push buttons located on the front control panel.
Power requirement is 110 volts.
Code: FPIVA Three Spindle Automatic Drill
FP-IVT 3 SPINDLE ELECTRIC PAPER DRILL
The FP–IVT is the table top 3 spindle drill with a drilling capacity of up to 2 1/2”.
The center head is fixed and the outer two heads are adjustable from 2 1/4” to
4 3/4”. The table has self centering guides for placement of paper. Paper size
ranges form 3 1/2” to 17” wide. Back margin is adjustable up to a 3 1/2” depth.
Table size is 18 1/4” x 14 3/8”. Paper drills are available from 1/8” (3 mm) to
3/8” (9 mm) in diameter.
The FP-IVT is equipped with a moving table that has two stop bars. The first stop
bar has adjustable stops so that if drilling jobs with more than 3 holes, this can be
set up to accommodate these jobs. The preprogrammed bar has settings for two
stops (6 hole) and 12 stops (36 hole).
The FP-IVT has a unique design. The belt driven spindles are powered by three
1/4 horse power motors. As an added safety feature, when the drill head is in the
up position, the motor does not run. Power is 110 volts.
Code: FP-IVT Three Spindle Table Top Drill
24
Model: FP-IVA: FP-IVT:
Operation Two button automatic control Hand powered
Power 3 - 110 Volts ¼ H.P.
1 - 110 Volts 3/4 H.P.
3 - 110 Volts 1/3 H.P.
Drill Capacity 4” (1/4” Diameter or larger) 2 ½” recommended but can do
4” (1/4” Diameter or larger)
Drill Diameter 1/8” (3 mm) to 3/8” (9 mm) 1/8” (3 mm) to 3/8” (9 mm)
Drill Bit Style Style “FP-100” Style “FP-60”
Distance Between
Drill Heads
2 1/4” to 4 3/4” center head fixed 2 1/4” to 4 3/4” center head fixed