Specifications

FP PAPER DRILL
The Model FP60 Paper Drills are the next generation in paper drills and
punches. Two models, The FP60-LS and the FP60 offer various fea-
tures to meet your needs.
Both models can drill up to 2 1/2” or over a ream of paper at one time.
The “Chuckless” system has the drill bit connected directly to motor
shaft. This eliminates vibration of drill bits for smoother operation, easier
drilling and fewer jams. As an added safety feature, the motor is only in
operation when drill handle is lowered.
The FP60-LS Drill is equipped with an adjustable stop-gauge to allow
drilling for customized or standard hole patterns. The drill is also
equipped with a pre-programmed bar so that drill stops are already set
for standard drilling patterns. These include single hole, two hole, and
three hole patterns. The operation is fast and accurate. Just press the
table release to move the paper to the next stop.
The FP60-LS is shipped with one 1/4” drill bit. Optional drill bits may be
added in sizes ranging from 1/8” to 1/2”. Drill bits are the standard Style
“A” bits which are easily available. The drill is powered by a 1/3 HP 110
volt motor.
The FP60 is an economically priced alternative to the FP60LS. The
FP60 does not come with the preprogrammed bar . The drill takes a
Style “F” Drill Bit which is available in sizes 1/8”, 3/16”, 1/4”, 5/16” and
3/8”.
Specifications:
Power: 110 V
Table Size: 18.4” W X 12.8” D X 16” H
Shipping Weight: 90 lb
Code: FP-60
FP-60LS
Single Spindle Paper Drills
Model: FP60: FP60-LS:
Power 110 Volts ¼ H.P. 110 Volts 1/3 H.P.
Drill Capacity 2 ½” (1/4” Diameter or larger) 2 ½” (1/4” Diameter or larger)
Drill Diameter 1/8”, 3/16”, ¼” , 5/16”, 3/8” 1/8” to ½”
Drill Bit Style Style “F” Style “A” 2” or 2 1/2”
Table Operation Moving table, adjustable stops Moving table, adjustable stops and preprogrammed
stop bar.
25
FP60-LS special table has both a
preprogrammed stop bar with 1. 2,
3 ,4, and 22 holes and a bar with ad-
justable stops.