Specifications

Code: Gauge: Width x Length:
SW12-75
75 12” x 2,000’
SW16-75
75 16” x 2,000’
SW18-75
75 18” x 2,000’
SW12-75P
75 12” x 3,500’
SW16-75P
75 16” x 3,500’
SW18-75P
75 18” x 3,500’
Shrink Wrap
SHRINK AND SEAL SYSTEMS
Shrink Wrap Film
Film can be used on all types of applications. For both manual
and semi-automatic shrink wrap machines. Two types of film
are available depending on preference and type of machine.
DYNACLEAR-PVC Shrinks at lower temperature, film great for
all general purposes applications. Comes in 2,000 foot rolls.
QUICK SHRINK is a Polyolefin film that is a low cost all around
general purpose shrink film. Comes in 3,500 foot rolls.
Other sizes and gauges available.
The Model PP450H and PP600H are table-top shrink bar
sealers which come complete with heat gun. Machines
run on 110 volts.
Code: PP450H 18” Sealer w/Heat Gun
PP600H 24” Sealer w/Heat Gun
HG Heat Gun
Bar Sealers
PP450H PP600H
Shrink Width: 18” 24”
Shipping Weight: 26 lbs 33 lbs
32
The Model PP-1519EC Series is an economic 15” W x 19” L-sealer.
This L-Sealer and Tunnel combination system is 76” in total length. The
tunnel features a fully recirculating air chamber, digital temperature con-
trol, pin wheel hole punch, 8 ft power cord (110 volt models only) and
casters. The 1519ECM can be purchased with optional space saver
turnaround conveyor. Models are as follows:
Code:
PP1519EC Economy System
PP1519ECM With Magnet Hold Down
PP1519ECMC
With Magnet Hold Down and
Power Discharge
The Model PP48ST is a unique “All-In-One” L-Sealer and Shrink
Tunnel. The unit features a 12 1/2” X 18 1/2” seal area. New “Band
Seal Technology” will seal and shrink PVC or Polyolefin Shrink Films
with no smoke or residue. Includes Magnetic Hold Down. Heavy duty
Plexiglass hood fully encloses sealing and shrinking operation for
maximum operator safety. Power requirement is 110 volt, 20 amps.
Shipping weight is 275 lbs. Dimensions are 49” L x 26” W x 45” H.
The Model PP76ST has increased seal dimensions of 16” x 22”. Maxi-
mum film width is 24”. The PP76ST comes with a Magnetic Hold Down
and Heavy duty Plexiglass hood.
Power requirement is 220 volt, 25 amps. Shipping weight is 350 lbs.
Dimensions are 56” L x 30” W” x 45” H.
.
Code: PP48ST 12.5” x 18.5” Shrink System
PP76ST 16” x 22” Shrink System