Service manual

– 13 –
CD-BA160H/1700H
How to remove the pickup (See Fig. 13-3)
1. Remove the screws (B1) x 2 pcs., to remove the shaft (B2)
x1pc.
2. Remove the stop washer (B3) x 1 pc., to remove the gear
(B4) x 1pc.
3. Remove the pickup.
Figure 13-3
CD MECHANISM SECTION
Perform steps 1, 2, 3, 12, 13, 14 and 15 of the disassembly
method to remove the CD mechanism.
How to remove the loading motor
(See Fig. 13-2)
1. Remove the belt (A1) x 1 pc., from the motor side.
2. Bend the hooks (A2) x 5 pcs., to remove the loading motor.
Figure 13-2
Note
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
(A2)x3
Loading Motor
Disc Tray
(A2)x2
Belt
(A1)x1
Loading
Motor
PWB
(B1) x2
ø2.6 x6mm
Shaft
(B2) x1
Stop Washer
(B3) x1
Gear
(B4) x1
CD Mechanism
Pickup
Figure 13-1
(F1) x2
Ø 2.6 x 5mm
Motor
TAPE2
How to remove the motor (See Fig. 13-1)
1. Remove the belt.
2. Remove the screws (F1) x 2 pcs., to remove the motor.