DVD MINI SYSTEM MINI-CHAÎNE DVD CADENA MINI CON DVD MODEL MODÈLE MODELO CD-DV999W OPERATION MANUAL MODE D’EMPLOI MANUAL DE MANEJO ENGLISH FRANÇAIS ESPAÑOL NTSC/PAL *DV999W(EN)_FRONT Please refer to pages i and E-1 to E-70. Se reporter aux pages i et F-1 à F-70. Consulte las páginas ii y S-1 a S-70. SHARP CORPORATION 1 04.3.
CD-DV999W Copyright Information: Renseignements sur les droits d’auteur: I Unauthorized copying, broadcast, public display, transmission, public performance and rental (regardless of whether or not such activities are for profit) of disc contents are prohibited by law. I This system is equipped with copy protection technology that causes substantial degradation of images when the contents of a disc are copied to a video tape.
1 2 3 4 CD-DV999W Información sobre los derechos de autor: I La copia, difusión, exposición pública, transmisión, interpretación pública y el alquiler (independientemente de si estas actividades tienen o no fines lucrativos) del contenido de los discos sin autorización están prohibidos por la ley. I Este sistema está provisto de tecnología para protección contra copias que degrada de manera substancial las imágenes cuando se copia el contenido de un disco a una cinta de vídeo.
ENGLISH CD-DV999W ENGLISH Introduction Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. Accessories Please confirm that the following accessories are included. Important Instruction CD-DV999W DVD Mini System consisting of CD-DV999W (main unit) and CP-DV999 (speaker system).
Contents CD-DV999W H General Information Page Precautions ................................................................................... 3 Controls and indicators ......................................................... 4 - 8 H Preparation for Use System connections ............................................................. 9 - 13 Remote control ........................................................................... 14 H Basic Operation H Video CD/CD Playback ENGLISH Page Video CD ...
CD-DV999W ENGLISH Precautions Warning: H General I Please ensure that the equipment is positioned in a well ventilated area and ensure that there is at least 10 cm (4") of free space along the sides, top and back of the equipment. 10 cm (4") 10 cm (4") The voltage used must be the same as that specified on this unit. Using this product with a higher voltage other than that which is specified is dangerous and may result in a fire or other type of accident causing damage.
Controls and indicators CD-DV999W ENGLISH H Front panel 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. Disc Trays ............................................................................................ 19 Timer Set Indicator ............................................................................. 62 On/Stand-by Button ......................................................................
CD-DV999W Controls and indicators (continued) ENGLISH H Display General Information 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27.
CD-DV999W ENGLISH H Rear panel Audio Digital Output Socket .............................................................. 66 S-Video Output Socket ....................................................................... 19 Cooling Fan AC Voltage Selector ............................................................................ 12 AC Power Lead ............................................................................... 9, 12 FM 75 Ohm Aerial Terminal ...................................................
CD-DV999W Controls and indicators (continued) ENGLISH H Remote control 1 Reference page 20 2 21 3 22 23 24 General Information 4 5 6 25 7 8 9 10 26 27 28 11 12 13 14 29 30 31 32 15 16 33 34 35 36 17 18 19 37 38 39 40 E-7 *DV999W_EP06-08 7 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. Remote Control Transmitter ..............................................................
CD-DV999W ENGLISH H Remote control with shift button Reference page Karaoke/Audio Mode Button ............................................................. 51 DVD Setup Button ......................................................................... 20, 24 DVD Sound Button ............................................................................. 35 DVD Super Picture Button ................................................................. 37 DVD/Video CD/CD A-B Repeat Button ............................
CD-DV999W System connections ENGLISH AM loop aerial FM aerial Right speaker Preparation for Use Left speaker To a wall socket (See page 12) Red E-9 *DV999W_EP09-14 9 04.3.
CD-DV999W H Aerial connection H Speaker connection Supplied FM aerial: Connect the black wire to the minus (-) terminal, and the red wire to the plus (+) terminal. Connect the FM aerial wire to the FM 75 OHMS terminal and position the FM aerial wire in the direction where the strongest signal can be received. ENGLISH Caution: Supplied AM loop aerial: Connect the AM loop aerial to the AM LOOP socket. Position the AM loop aerial for optimum reception. Place the AM loop aerial on a shelf, etc.
CD-DV999W ENGLISH System connections (continued) H Placing the speaker system H TV/monitor connection The left and right speakers have individual shapes. For best performance, place the speakers according to the diagram below. If the TV/monitor has a video input, connect it to the VIDEO OUT socket on the rear of the unit. Left speaker Right speaker Preparation for Use TV To video input socket Notes: I The speakers are magnetically shielded.
CD-DV999W H Setting the AC voltage selector ENGLISH Check the setting of the AC voltage selector located on the rear panel before plugging the unit into a wall socket. If necessary, adjust the selector to correspond to the AC power voltage used in your area. Turn the selector with a screwdriver until the appropriate voltage number appears in the window (110 V, 127 V, 220 V or 230 V - 240 V AC). H AC power connection Notes: I The unit will start the tape initialisation when plugged in to the AC socket.
CD-DV999W ENGLISH System connections (continued) H Setting the FM/AM span selector H Demonstration mode Preparation for Use The first time the unit is plugged in, the unit will enter the demonstration mode. You will see words scroll. To cancel the demonstration mode: When the unit is in the power stand-by mode (demonstration mode), press the X-BASS/DEMO button. The demonstration mode will be cancelled and the display will disappear.
Remote control H Battery installation 1 2 3 Open the battery cover. Insert the batteries according to the direction indicated in the battery compartment. When inserting or removing the batteries, push them towards the – battery terminal. Close the cover. CD-DV999W ENGLISH Notes concerning use: I Replace the batteries if the operating distance is reduced or if the operation becomes erratic. Purchase 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).
CD-DV999W General control ENGLISH 1 H Volume control 2 Main unit operation: When the VOLUME control is turned clockwise, the volume will increase. When it is turned anti-clockwise, the volume will decrease. 3 Remote control operation: Press the VOLUME (+ or -) button to increase or decrease the volume. 4 0 .....
1 Setting the clock CD-DV999W ENGLISH 5 2 Press the 5 3 or 2 4 button to adjust the hour and then press the MEMORY/SET button. 3 Press the 5 3 or 2 4 button once to advance the time by 1 hour. Hold it down to advance continuously. 6 5 6 7 In this example, the clock is set for the 24-hour (0:00) display. 1 2 3 8 Press the 5 3 or 2 4 button once to advance the time by 1 minute. Hold it down to change the time in 5-minute intervals. Press the ON/STAND-BY button to turn the power on.
CD-DV999W ENGLISH Types of playable discs The unit can playback discs bearing any of the following marks: DVD Video DVD-R DVD-RW Audio CD CD-R/CD-RW 4.7 Note 2: The specific playback functionality for some DVD discs is determined by the disc manufacturer. Because this system plays disc data in accordance with the disc manufacturer’s guidelines, some functions may not be available on some discs. Be sure to read the instructions provided with the disc.
CD-DV999W ENGLISH H Disc that cannot be played Icons used on DVD discs I This unit does not support below disc types: DVD-Audio I CDG I Photo CD I CD-ROM I SACD Sample icons I I The above discs sometimes cannot be played, sometimes only pictures without sound will appear or only sound can be heard. Playing such a disc may damage the speakers due to the possibility or enormous sound output or may even cause hearing injuries whilst using headphone.
CD-DV999W Preparing to watch a DVD (DVDs) ENGLISH To watch DVD video images on the TV: 1 Turn on the TV. 2 Set the TV to “AV”, “VIDEO”, etc. 3 Turn on the unit and start play. S-video cable (commercially available) See page 29 for playing disc. Note: There is no audio signal supplied to the TV. H Loading a DVD (DVDs) VIDEO IN S-VIDEO INPUT To TV with external terminals DVD Explanation Video cable (supplied) 1 2 3 4 Press the ON/STAND-BY button to turn the power on. Press the DVD/CD button.
Setting up for playback of an NTSC disc CD-DV999W Specify the colour system in accordance with the TV connected when playing back an NTSC disc. 1 Whilst a disc is stopped, press the SET UP button whilst pressing down the SHIFT button to display the setup screen. 2 3 Use the cursor ▲ or ▼ button to select the “ Press the ENTER button and then use the cursor ▲ or ▼ button to select “NTSC”. ENGLISH TV MODE ”.
CD-DV999W ENGLISH TV mode setup The following describes how to select the DVD playback display format. 1 Whilst a disc is stopped, press the SET UP button whilst pressing down the SHIFT button to display the setup screen. 2 Use the cursor ▲ or ▼ button to select the “ A. Viewing on a wide screen TV screen (16:9): Using a 16:9 wide image Select 16 : 9 for wide DVD video output. I A wide image size is displayed when playing a wide image disc.
Parental setting ENGLISH Country codes: Certain discs come preset with country codes and parental level settings that are defined for particular countries. Discs equipped with the parental lock function are rated according to their content. The rated content allowed by a parental lock level and the way a DVD can be controlled may vary from disc to disc. Some discs, for example, may let you edit out violent scenes and replace them with scenes more suitable for viewing by children.
CD-DV999W Parental setting (continued) ENGLISH 7 Press the cursor ▼ button to select “CODE”, then press ENTER and then use the cursor 1, 0, ▲ or ▼ button to select the desired country code (see page 22). 8 Press the ENTER button to confirm the setting. To exit the setup screen and return to the startup screen, press the SET UP button whilst pressing down the SHIFT button or the RETURN button. Caution: Play back the disc to confirm that the parental level setting is correct.
Audio setting CD-DV999W ENGLISH 6 Press the ENTER button to confirm the setting. To exit the setup screen and return to the startup screen, press the SET UP button whilst pressing down the SHIFT button or the RETURN button. H Setting the MPEG Audio Out 1 Whilst a disc is stopped, press the SET UP button whilst pressing down the SHIFT button to display the setup screen. 2 Use the cursor ▲ or ▼ button to select the “ SETUP”. 3 Press the ENTER button and then use the cursor ▲ or ▼ DIGITAL”.
CD-DV999W ENGLISH Audio setting (continued) H Setting the cinema voice 1 Whilst a disc is stopped, press the SET UP button whilst pressing down the SHIFT button to display the setup screen. 2 Use the cursor ▲ or ▼ button to select the “ SETUP”. 3 Press the ENTER button and then use the cursor ▲ or ▼ button to select “CINEMA VOICE”. 4 Press the ENTER button to display the settings you can select. DVD Setting Use the cursor ▲ or ▼ button to select “ON” or “OFF”.
CD-DV999W Use the cursor ▲ or ▼ button to select the “ DISC LANGUAGE”. 2 DISC LANGUAGE AUDIO ENGLISH SUB TITLE OFF MENU ENGLISH 3 3 Press the ENTER button and then use the cursor ▲ or ▼ button to select “SUB TITLE”, “AUDIO” or “MENU”. You can set “SUB TITLE”, “AUDIO” and “MENU” individually. 4 5 After selecting the item, press the ENTER button. Select the language you want to use with the cursor ▲, ▼, 1 or 0 button.
CD-DV999W Disc language setting (continued) ENGLISH Language code list for disc language DVD Setting Code AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DA DE DZ EL EN EO ES ET EU FA FI FJ FO FR Language name Code FY GA GD GL GN GU HA HI HR HU HY IA IE IK IN IS IT IW JA JI JW KA KK KL KM KN KO KS KU KY LA LN LO LT LV Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali; Bangla Tibetan Breton Catalan Corsican Czech Wels
Changing the display mode CD-DV999W ENGLISH H To change the display mode H DVD mode operation indicators You can select “auto”, “on”, or “off” as the display mode. The following shows what appears on the display when “auto” or “on” is selected. The following are examples of display indicators that appear during DVD playback.
CD-DV999W Playing a DVD (DVDs) ENGLISH H To play a disc 1 2 3 Press the ON/STAND-BY button to turn the power on. Press the DVD/CD button to display the startup screen shown. Load the disc(s) you want to play. See page 19 for information about loading discs. DVD Playback 4 Press the 0 button to start playback. DVD Notes: I If the disc you are using supports auto start, it starts to play automatically (even if you do not press the 0 button), as soon as you close the disc tray.
Other disc play features ENGLISH H To resume playback 1 H Chapter skip Whilst a disc is playing, press the 5 3 PRESET X or 2 4 PRESET W button. I Press the 2 4 PRESET W button to skip to the next chapter. I Press the 5 3 PRESET X button to skip to the beginning of the current chapter. Press the 5 3 PRESET X button again to skip to the beginning of the previous chapter. I You can also press the 5 /3 or 2 /4 button on the remote control for the same operation.
CD-DV999W Other disc play features (continued) ENGLISH 1 H Still (Pause) and frame advance 1 2 2 Whilst a disc is playing, press the STILL 60 button. DVD I This freezes the image on the screen. I Each press of the STILL 60 button advances the frame in the still mode. 3 To cancel still picture and return to normal play, press the 0 button. 4 DVD Notes: DVD Playback I You may not be able to use these functions with some discs. I Frame advance cannot be used with audio CDs.
1 Using the function control CD-DV999W 2 3 4 1 Using function control, you can check at a glance and change the current settings of the following items: subtitle, angle, audio, digital gamma and digital super picture. Function control also provides you three ways of direct skips (title, chapter and time). I Whilst the disc is playing, press the SET UP button whilst pressing down the SHIFT button to display the screen shown below.
CD-DV999W Using the function control (continued) ENGLISH 2 Use the 0 - 9 buttons to select the title number to which you want to skip. 5/ 5 DVD I You can also select the title number by pressing the cursor ▲ or ▼ button. 3 Press the ENTER button. The beginning of the specified title appears. Notes: Advanced DVD Features I The title number you can enter depends on number of the titles recorded on a disc you play.
Using the function control (continued) Press the DIRECT button three times to select . 2/5 10 / 30 – – : – – :: – – Use the 0 - 9 buttons to enter the time to which you want to skip. 01 : 06 –– DVD DVD I You can also enter the time by pressing the cursor ▲ or ▼ button. Then press the cursor 1 or 0 button to select the place where you want to enter the time. 3 Press the ENTER button. I You can also press the SUB TITLE button on the remote control for the same operation in step 3.
CD-DV999W ENGLISH Using the function control (continued) H 3-D Virtual Surround setting H Audio setting A number of different methods are used to record audio onto a DVD-Video disc, including multi-channels (used for voiceovers in other languages), DTS, MPEG audio and Linear PCM. Your system provides a number of different audio modes from which you can choose to suit the type of disc you are playing. 1 Press the SET UP button whilst pressing down the SHIFT button during playback.
Using the function control (continued) CD-DV999W ENGLISH H Digital gamma setting Digital gamma is a digital image quality enhancement function that gives a richer image by brightening the darker and more obscure portions of the image without altering the brightness of the brighter portions, thereby making the entire image easier to see. Perform the following procedure to change the setting between “ON” and “OFF”, and the level for the digital gamma setting.
CD-DV999W ENGLISH Using the function control (continued) H Digital super picture setting H To zoom an image Digital super picture is a digital image quality enhancement function that gives a clearer image by sharpening the details and outlines in the image and reducing the amount of picture noise. Perform the following procedure to change the setting between “ON” and “OFF”, and the level for the digital super picture setting.
Repeat play CD-DV999W ENGLISH H Title repeat Example: To repeat the title you are currently viewing Play the title you want to repeat. Press the button twice to repeat the title. To cancel repeat play, press the disappears. 2/5 8 / 30 button again. The “ T DVD T ” indicator Note: You may not be able to use this function with some discs. H A-B repeat 1 When playback reaches the start point of the scene, press the button whilst pressing down the SHIFT button.
CD-DV999W Programmed play ENGLISH Notes: H Chapter programmed play You can choose up to 24 favourite chapters for playback in the order you like using this function. (Title cannot be programmed) Advanced DVD Features 1 Whilst a disc is stopped, press the MEMORY/DIMMER button to display the programme screen. Cursor 2 Use the cursor ▲ or ▼ button to select the desired title and then press the ENTER button.
Selecting titles from the menu Setting parameters using the disc menu Some DVDs have a title menu that you use to select the title you want to play. Some DVDs include a disc menu that you can use to select a subtitle language, audio channel, and DTS or MPEG audio. You can also turn disc menu on and off. CD-DV999W ENGLISH H To display subtitles H To select a title This function can be performed with only discs that have been played once, totally or partially.
CD-DV999W ENGLISH Video CD Preparation for video CD playback A CD that contains motion pictures can be played. You can enjoy motion pictures with the sound quality of MDs and the picture quality of VHS tapes. Digital compression technology allows the continuous playback of up to 74 minutes from a 12 cm disc. With video CDs, you can select the items you want to watch from the on-screen menu. The disc symbols are found on the disc labels or jackets.
Video CD playback CD-DV999W ENGLISH Playback control: Video CDs that support “playback control” can display still pictures. This function can be used with video CD software (video CDs with playback control) that have a playback method recorded on them. You can select items you want to watch from the menu displayed on the TV screen, or you can show still pictures. Turn on the TV and set the input to “VCR”. H Playback 4 Press the ON/STAND-BY button to turn the power on. Press the DVD/CD button.
CD-DV999W ENGLISH Video CD playback (continued) To interrupt playback: Caution: Press the 6 / STILL button on the remote control. To resume playback from the same point, press the 0 button. I Do not place two discs in one disc tray. I Do not play discs with special shapes (heart or octagon-shaped). It may cause malfunctions. I Do not push the disc tray whilst it is moving. I Do not move the disc tray by hand. This may cause malfunctions.
CD playback CD-DV999W This system can also play audio CD-R and CD-RW discs, but cannot record. Some audio CD-R and CD-RW discs may not be playable due to the status of disc or the device that was used for recording. ENGLISH H CD Playback 1 2 3 4 Press the ON/STAND-BY button to turn the power on. Press the DVD/CD button. Press the s 1 button and within 5 seconds, press the OPEN/ CLOSE button to open the disc tray 1. Place a disc on the disc tray 1, label side up.
CD-DV999W ENGLISH CD playback (continued) I Playback will begin from track 1 on the disc 1. After that disc finishes playing, the next disc will automatically play. I After the last track on the fifth disc is played, the unit stops automatically. I When there is no disc, the empty tray will be skipped to the next tray with a disc. To move to the beginning of the next track: To exchange other CDs whilst playing a disc: Press the 2 4 PRESET W button for less than 1.5 seconds during playback.
CD Playback (continued) CD-DV999W Caution: After using repeat or random play, be sure to press the ■ button. Otherwise, the disc(s) will play continuously. H Repeat play CD playback can be changed as follows. Press the button repeatedly on the remote control. All disc repeat Normal playback Track repeat Disc repeat To cancel repeat play: Press the button repeatedly to turn off the “ ”. H A-B repeat 1 H Random play To play all tracks on the chosen discs: 1. Press one of the s 1 - s 5 buttons.
CD-DV999W ENGLISH CD playback (continued) H Programmed play 1 4 Video CD/CD Playback By specifying discs from 1 to 5, and tracks from 1 to 99, you can choose up to 32 selections for playback in the order you like. 5 Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be programmed. 2 If you make a mistake, the programmed tracks can be cleared by pressing the cursor 0 button to go to the track confirmation, then press the CLEAR/DISPLAY button.
1 MP3/WMA disc MP3 2 3 MP3 is a compression format. It is an acronym which stands for MPEG Audio Layer 3. MP3 is a type of audio code which is processed by significant compression from the original audio source with very little loss in sound quality. WMA 4 WMA files are Advanced System Format files that include audio files which are compressed with Windows Media Audio codec. WMA is developed by Microsoft as an audio format file for Windows Media Player.
CD-DV999W ENGLISH MP3/WMA disc (continued) Notes: H To skip during playback 1 During playback, press the 5 3 PRESET X (5 / 3) button to go to the previous track, or press the 2 4 PRESET W (2 / 4) button for the next track of the same folder. Video CD/CD Playback H Speed search during playback 1 Press the 5 3 PRESET X (5 / 3) or 2 4 PRESET W (2 / 4) button for more than 1.5 seconds during playback. I Press it repeatedly to toggle speeds.
Playing karaoke CD-DV999W ENGLISH You can enjoy karaoke on DVDs, video CDs, CDs, MP3 Discs, radio, cassettes, and other external devices by connecting a separately available microphone to this unit. 1 Set the MIC LEVEL control to MIN to protect the speakers from shock noise and to avoid disturbing noises. 2 Connect the microphone(s) to the MIC 1 or MIC 2 socket or both sockets for enjoying duets. I Use a microphone with a 6.3 mm (1/4") plug and an impedance of 600 ohms.
CD-DV999W ENGLISH Playing karaoke (continued) Notes: H To change the audio mode Sound of the playback source can be switched among the STEREO, L-CH, RCH, and V-CANCEL (VOCAL CANCEL) modes. The audio mode function is used when the left and right channels have individual signals from each other. Press the KARAOKE button whilst pressing down the SHIFT button on the remote control until the desired audio mode is displayed.
Listening to the radio CD-DV999W ENGLISH H Tuning 1 2 3 Press the ON/STAND-BY button to turn the power on. Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). Press the TUNING (X or W) button to tune in to the desired station. Manual tuning: Press the TUNING button as many times as required to tune in to the desired station. When the TUNING button is pressed for more than 0.
CD-DV999W ENGLISH Listening to the radio (continued) H Memorising a station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) 1 2 Perform steps 1 - 3 in “Tuning” on page 52. 3 Within 30 seconds, press the PRESET (X or W) button to select the preset channel number. Press the MEMORY/SET (MEMORY/DIMMER) button to enter the preset tuning saving mode. H To scan the preset stations The stations saved in memory can be scanned automatically.
Listening to a cassette tape (TAPE 1 or TAPE 2) CD-DV999W ENGLISH Before playback: Tape 1 playback 1 2 3 Press the ON/STAND-BY button to turn the power on. 4 Load a cassette into the TAPE 1 cassette compartment with the side to be played facing toward you. 5 Press the 0 button to start playback. Press the TAPE (1 2) button to select TAPE 1. Open the cassette door by pushing the area marked “7”.
CD-DV999W Listening to a cassette tape (TAPE 1 or TAPE 2) (continued) ENGLISH Tape Playback Tape 2 playback 1 2 3 Press the ON/STAND-BY button to turn the power on. 4 Load a cassette into the TAPE 2 cassette compartment with side A facing you. 5 Press the sides. Press the TAPE (1 Open the cassette door by pushing the area marked “7 ”. button to choose one side or both … To listen to both sides. To play both sides ( ), start from side A.
Recording to a cassette tape ENGLISH H Various tape function Main unit Remote control Side A playback Before recording: Operation I When recording important selections, make a preliminary test to ensure that the desired material is properly recorded. Press in the stop mode. I SHARP is not liable for damage or loss of your recording arising from malfunction of this unit. I The volume and sound controls can be adjusted with no effect on the recorded signal (Variable Sound Monitor).
CD-DV999W Recording to a cassette tape (continued) ENGLISH H Recording from a DVD (DVDs) 1 2 Press the ON/STAND-BY button to turn the power on. Load a cassette into the TAPE 2 cassette compartment with the side A facing you. Wind past the leader of the tape, on which recording cannot be performed. 3 4 Tape Recording 5 Press the DVD/CD button and load the desired disc. Press one of the s 1 - s 5 buttons to select the disc to be recorded. Press the 0 button to start DVD playback.
CD-DV999W H Recording from MP3/WMA discs ENGLISH You can record 5 discs continuously. 1 2 Press the ON/STAND-BY button to turn the power on. Load a cassette into the TAPE 2 cassette compartment with the side A facing you. Wind past the leader of the tape, on which recording cannot be performed. 5 Press the DVD/CD button and load the desired disc. Press one of the s 1 - s 5 buttons to select the disc to be recorded and press 0 button to start playback.
CD-DV999W ENGLISH Recording to a cassette tape (continued) H Recording from a CD (CDs) Recording from several CDs continuously: You can record the desired CD using the DIRECT PLAY button. 1 2 3 Press the ON/STAND-BY button to turn the power on. To perform programmed recording: Press the DVD/CD button. Load a cassette into the TAPE 2 cassette compartment with the side A facing you. Wind past the leader of the tape, on which recording cannot be performed. 4 Press the 1.
CD-DV999W 1 2 Tune in to the desired station. (See page 52.) Load a cassette into the TAPE 2 cassette compartment with side A facing you. H Dubbing from tape to tape You can record from TAPE 1 to TAPE 2. 1 2 Wind past the leader of the tape, on which recording cannot be performed. 3 Press the button to choose one side or both sides. … To record on both sides. … To record on only one side. 4 Press the ON/STAND-BY button to turn the power on.
CD-DV999W ENGLISH Timer and sleep operation Timer playback: The unit turns on and plays the desired source (DVD, CD, Video CD, MP3 disc tuner, tape) at the preset time. Timer recording: The unit turns on and starts recording from the tuner at the preset time. This unit has 2 types of timer: ONCE TIMER and DAILY TIMER. Advanced Features Once timer: Once timer play and once timer recording work for one time only at a preset time.
CD-DV999W ENGLISH 4 Within 10 seconds, press the 5 3 or 2 4 button to select “ONCE SET” or “DAILY SET”, and press the MEMORY/ SET button. 8 9 Set the time to finish as in steps 6 and 7 above. Switch input with the 5 3 or 2 4 button, and then press the MEMORY/SET button. To select the timer playback source: DVD/CD, TUNER, TAPE 1 or TAPE 2. Press the 5 3 or 2 4 button to select “PLAY” or “REC”, and press the MEMORY/SET button. White Red To select the timer recording source: TUNER.
CD-DV999W Timer and sleep operation (continued) ENGLISH 12 When the preset time is reached, playback or recording will start. In the timer playback mode, the volume will increase gradually until it reaches the volume you were listening to before your system entered the timer stand-by mode. 13 When the timer end time is reached, the system will enter the power stand-by mode automatically. Once timer: The timer will be cancelled.
1 CD-DV999W 3 The radio, compact disc and cassette tape can all be turned off automatically. 1 2 3 4 5 4 Press the CLOCK/TIMER button. Within 10 seconds, press the 5 3 or 2 4 button to select “SLEEP”, and press the MEMORY/SET button. Press the 5 3 or 2 4 button to select the time. (Maximum: 3 hours - Minimum: 1 minute) I 3 hours - 5 minutes: 5-minute intervals I 5 minutes - 1 minute: 1-minute intervals 6 7 Play back the desired sound source. 5 Press the MEMORY/SET button. “SLEEP” will appear.
CD-DV999W ENGLISH Enhancing your system The connection lead is not included. Purchase a commercially available lead as shown below. H Listening to sounds of game, VCR, DVD, etc. 1. Connect a video game system, VCR, DVD player, etc. to the front GAME INPUT (VIDEO, AUDIO L and R) sockets. Game system, VCR, DVD player, etc. 2. Connect a TV to the rear VIDEO OUT socket. Switch the TV input to auxiliary. 3. Press the ON/STAND-BY button to turn the power on. 4. Press the GAME/VIDEO button. 5.
Troubleshooting chart Optical digital lead (not supplied) Dolby digital, DTS/MPEG audio processor or MD recorder To the digital input socket Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorised SHARP dealer or service centre. H General Possible cause Symptom ● The clock is not set to the correct time. ● Did a power failure occur? Reset the clock. (Refer to page 16.
CD-DV999W ENGLISH Troubleshooting chart (continued) H DVD player H CD player Symptom References ● Playback sounds are skipped. Possible cause Symptom ● Is the disc very dirty? ● Is the system located near excessive vibrations? ● Has condensation formed inside the system? ● Playback does not start. ● Playback stops in the middle or is not performed properly. ● The control buttons do not function. Music or video playback is interrupted.
CD-DV999W H Clearing all the memory (reset) H Tuner Possible cause Symptom ● Is the unit placed near the TV or computer? ● Is the FM aerial or AM loop aerial placed properly? Move the aerial away from the AC power lead if it’s located nearby. ● The radio makes unusual noises continuously. ENGLISH 1. Press the ON/STAND-BY button to enter the power stand-by mode. 2. Whilst pressing down the I6 button and the X-BASS/DEMO button, press the 5 3 PRESET X button until “CLEAR AL” appears.
CD-DV999W ENGLISH Troubleshooting Maintenance chart (continued) Specifications H Cleaning the tape-handling parts As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. I Dirty heads, capstans or pinch rollers can cause poor sound and tape jams.
CD-DV999W Signal system NTSC/PAL Supported disc types DVD, audio CD, CD-R, CD-RW, VCD, MP3/ WMA Video output Output socket: Pin socket x 1 Output level: 1 Vp-p (75 ohms) S-video output Y output level: 1 Vp-p (75 ohms) C output level: 0.
MEMO/MÉMORANDUM/MEMORÁNDUM/ *DV999W(EN)_MEMO 1 / 04.3.
MEMO/MÉMORANDUM/MEMORÁNDUM/ *DV999W(EN)_MEMO 2 / 04.3.
UP CD-DV999W DVD MINI SYSTEM DOWN
