User Manual

CD-DV999W

E-14

ENGLISH

Preparation for Use

CD-DV999W (Z)

TINSZA017AWZZ

Remote control

H Battery installation

1 Open the battery cover.

2 Insert the batteries according to the direction indicated in the battery

compartment.

When inserting or removing the batteries, push them towards the –

battery

terminal.

3 Close the cover.

Precautions for battery use:

I Replace all old batteries with new ones at the same time.

I Do not mix old and new batteries.

I Remove the batteries if the unit is not to be used for long periods of time.

This will prevent potential damage due to battery leakage.

Caution:

I Do not use rechargeable batteries (nickel-cadmium battery, etc.).

I Installing the batteries incorrectly may cause the unit to malfunction.

Notes concerning use:

I Replace the batteries if the operating distance is reduced or if the operation

becomes erratic. Purchase 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or

similar).

I Periodically clean the transmitter on the remote control and the sensor on

the unit with a soft cloth.

I Exposing the sensor on the unit to strong light may interfere with operation.

Change the lighting or the direction of the unit.

I Keep the remote control away from moisture, heat, shock and vibrations.

H Test of the remote control

Check the remote control after checking all the connections have been made

correctly. (See pages 9 - 12.)

Point the remote control directly at the remote sensor on the unit.

The remote control can be used within the range shown below:

Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy

music.

0.2 m - 6 m

(8” - 20’)

Remote sensor

*DV999W_EP09-14 04.3.4, 17:4314