User Manual

ManualsBrandsSharp ManualsHome AudioCD-DV999W

CD-DV999W

E-43

ENGLISH

Video CD/CD Playback

CD-DV999W (Z)

TINSZA017AWZZ

Video CD playback (continued)

To interrupt playback:

Press the

/ STILL button on the remote control.

To resume playback from the same point, press the

button.

To stop playback:

Press the

button.

To exchange to other disc whilst playing:

Press one of the

1 -

5 buttons to select a tray and within 5 seconds,

press the OPEN/CLOSE button and exchange discs.

To remove the discs:

Whilst in the stop mode, press one of the

1 -

5 buttons and within 5 seconds,

press the OPEN/CLOSE button.

Notes:

I Playback control allows a video CD to be played back according to

instructions recorded on the disc. The “previous”, “next”, “return” and “select”

operations may function differently, depending on the CD.

I Some video CDs with playback control may have an “auto pause”. When

such a disc is played, the playback will stop automatically at the point where

an “auto pause signal” has been inserted.

I If the picture is noisy when a video CD is played back, there may be a

scratch on the video CD.

Caution:

I Do not place two discs in one disc tray.

I Do not play discs with special shapes (heart or octagon-shaped). It may

cause malfunctions.

I Do not push the disc tray whilst it is moving.

I Do not move the disc tray by hand. This may cause malfunctions.

I If the power fails whilst the tray is open, wait until the power is restored.

I If the disc tray is stopped with force, “ER-CD20” will appear on the display

for 3 seconds and the unit will not function. If this occurs, press the ON/

STAND-BY button to enter the power stand-by mode and then turn the

power on again.

I If TV or radio interference occurs during CD operation, move the unit away

from the TV or radio.

I If a disc is damaged, dirty, or loaded upside down, the disc will not play.

H To play without activating the playback control

function (video CDs with P.B.C. only)

You can play a video CD with P.B.C. without activating the playback control

function.

In this case, the menu screen will not appear, and the disc will be played in the

same way as a video CD without P.B.C.

Whilst in the stop mode, press the 2 4 PRESET

W W

W ( 2 /

4 ) button to cancel the P.B.C. mode and press the

button

to start playback.

Notes:

I The P.B.C. function cannot be cancelled during playback.

I Some video CDs with P.B.C. cannot be played back when the P.B.C. mode

is off.

I P.B.C. is activated automatically after playback.

*DV999W_EP41-44 04.3.4, 17:4743