User Manual

CD-DV999W
E-53
ENGLISH
Radio
CD-DV999W (Z)
TINSZA017AWZZ
Listening to the radio (continued)
H Memorising a station
You can store 40 AM and FM stations in memory and recall them at the push of
a button. (Preset tuning)
1
Perform steps 1 - 3 in “Tuning” on page 52.
2 Press the MEMORY/SET (MEMORY/DIMMER) button to
enter the preset tuning saving mode.
3 Within 30 seconds, press the PRESET ( X or W ) button to
select the preset channel number.
Store the stations in memory, in order, starting with preset channel 1.
4 Within 30 seconds, press the MEMORY/SET (MEMORY/
DIMMER) button to store that station in memory.
If the “MEMORY” and preset number indicators go out before the station
is memorised, repeat the operation from step 2.
5 Repeat steps 1 - 4 to set other stations, or to change a
preset station.
When a new station is stored in memory, the station previously
memorised will be erased.
Note:
The backup function protects the memorised stations for a few hours should
there be a power failure or if the AC lead is disconnected.
H To recall a preset station
Press the PRESET (X or W ) button for less than 0.5 seconds to select the
desired station.
H To scan the preset stations
The stations saved in memory can be scanned automatically. (Preset memory
scan)
1. Press the PRESET (X or W ) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be tuned in
sequentially, for 5 seconds each.
2. Press the PRESET (X or W) button again when the desired station is
located.
H To erase entire preset memory
1. Press the ON/STAND-BY button to enter the stand-by mode.
2. Whilst pressing down the I6 button and the X-BASS/DEMO button, press
the CLOCK/TIMER button until “TUNER CL” appears.
*DV999W_EP52-53 04.3.4, 17:4853