User`s manual

GOT812 Series User’s Manual

AMI BIOS Setup Utility

(2)

 Clear NVRAM

Use this item to clear the data in the NVRAM (CMOS). Here are the options

for your selection, No and Yes.

 Plug & Play O/S

When the setting is No, Use this item to configure all the devices in the

system. When the setting is Yes and if you install a Plug and Play operating

system, the operating system configures the Plug and Play devices not

required for boot. The default setting is No.

 PCI Latency Timer

This item controls how long a PCI device can hold the PCI bus before

another takes over. The longer the latency, the longer the PCI device can

retain control of the bus before handing it over to another PCI device. There

are several options for your selection.

 Allocate IRQ to PCI VGA

This item allows BIOS to choose an IRQ to assign for the PCI VGA card.

Here are the options for your selection, No and Yes.