Operation Manual, Box Connector Guide

4
Box Connector Guide
BEFORE USING Box Connector
Before using Box Connector, the Box Connector application must be installed on the multifunction machine.
For how to install the Box Connector application, please contact your dealer or nearest authorized service representative.
Basic requirements and system requirements for Box Connector
Initial value settings on Box Connector
Click the [Detail] key on the page which will have been displayed after selecting Box Connector from the [System Settings]
→ [Sharp OSA Settings] → [Embedded Application Settings] under the "Setting (Administrator)" to configure the following
items.
Import or export the initial value file
The following explains how to export the initial values used on a Box Connector which a multifunction machine is using
in order to use them on another Connector that is on the other machine, and how to import an exported file which
contains an initial value setting.
Select Box Connector from the [
System Settings ] → [ Sharp OSA Settings ] → [ Embedded Application Settings ] under the
"Setting (Administrator)".
Import the initial value file to register the following items in the detailed settings of the Box Connector.
Item Description
Multifunction machine Sharp OSA (MX-AMX2) Required
Port Control The following ports are enabled.
•
Server Port:
Sharp OSA (Extended Platform): HTTP
• Client Port: HTTPS
Direct Print Expansion Kit Required when printing xlsx, docx, and pptx files.
Other Network Settings Change the settings such as the IP Address, Subnet Mask,
Default Gateway, DNS server, and Proxy Server as
necessary.
Item Description
File Name Sets the initial value of the scan data File Name to store.
Include Date in File Name Sets whether the date and time is included with the File Name.
Item Description
Items which Box
Connector exports
File Name Specify the initial value for the scan data File Name to store.
Include Date in File Name Sets whether the date and time is included with the File Name.