Manual

OPERATING INSTRUCTIONS

ON/OFF SWITCH

To turn on the vacuum cleaner, touch

the switch on the appliance to the

=ON" position. (Fig. 6)

2 To turn off the vacuum cleaner,

touch the switch to the "OFF" posi-

tion. (Fig. 7)

Fig.6

POWER CONTROL SWITCH (EC-14TWT6/14TAT6/12TWT6 only)

A slide switch allows selection of any cleaning

power from low "L" to high "H". To increase the

suction power, slide the switch toward the "H"

position.

To decrease the suction power, slide the switch

toward the "L" position. (Fig. 7)

Power Control Knob

HIGH:

Greatest suction powe_r for heavy vacuuming

jobs. Medium power levels may be set

between "H" and "L".

LOW:

Low suction power for delicate cleaning jobs.

• |1 ii i

Fig. 7

DUST INDICATOR (EC-14Tw'r6/14TAT6/12TWT6only)

#..-

When the indicator enters the red area, re-

place the full paper bag with a new genuine

Sharp TWIN PLY_Micro-Filtration paper bag.

(Fig. 8)

NOTE:

Dust Indicator

Red area

00000000

Fig. 8

If the vacuum cleaner takes in excessive amounts of fine dust, the indicator may

enter the red area even if the paper bag is not filled,.

If the vacuum cleaner takes in excessive amounts of fiber (thread, cottony material

etc.), the indicator may not enter the red area even if the paper bag is filled.

Should either of the above occur, it is recommended that the paper bag be replaced with

a Sharp TWIN PLYTMnew paper bag.

i | II I