User Manual

7
CARE AND CLEANING
1.Remove the shelves and pockets from the cabi-
net and door. Wash them in warm soapy
dishwashing water; rinse in clean water and dry.
2.Clean the inside with a cloth soaked in warm
soapy dishwashing water. Then, use cold water
to wipe off soapy water.
3.Wipe the exterior with a soft cloth each time it is
soiled.
4.Clean the Magnetic door seal with a toothbrush
and warm soapy dishwashing water.
5.Whenever the refrigerator is moved to clean or
repositioned, the Evaporating pan should be re-
moved and cleaned.
How to remove/set
Remove the two screws to take the Evaporating
pan off. Please pay attention to the safety since
the compressor is very hot.
NOTE: Switching off your refrigerator
When cleaning all plastic parts inside this
refrigerator, only use diluted dishwashing
liquid(soapy water). Make sure that all plas-
tic parts are thoroughly rinsed with water
after cleaning.
Compressor
Evaporating pan
Some household cleaning chemicals may
affect the inside surfaces and plastic shelves
resulting in splitting or cracks occurring.
Replacing method of the lamp bulb
1.Unplug the refrigerator first to prevent electric
shock.
2.Remove the light cover.
Light cover
base E14, MAX 10W, T-20
Evaporating pan;
• Do not use polishing powder, benzine, hot wa-
ter etc.
• If undiluted detergent is used or soapy water is
not wiped off thoroughly, cracking of plastic parts
can result.
• Wipe any food oils adhered to plastic compo-
nents as they can cause cracking of the plastic
surface.
3.Replace the lamp bulb
with the same type.
If you switch your refrigerator off when you are
going away for an extended period, remove all food,
clean the interior thoroughly. Remove the power
cord plug from the power socket and leave all doors
open.