Operation Manual

175
Message Programming
Use the following procedure to select any option included in the message group:
Procedure
▼
1.
In the SETTING window, select “12 MESSAGE”.
• The MESSAGE window will appear.
2.
Select any option from the following options list:
1 RECEIPT LOGO
Receipt logo
2 E.BILL MESSAGE
Entertainment bill message
3 SCROLL MESSAGE
Scrolling message for customer
display
The following illustration shows those options included in this programming group.
12 MESSAGE 1 RECEIPT LOGO
l
See “Receipt logo” on page 175.
2 E.BILL MESSAGE
l
See “Entertainment bill message” on page 176.
3 SCROLL MESSAGE
l
See “Scrolling message for customer display”
on page 176.
■
Receipt logo
Your register can print programmed messages for customers on every receipt.
The logo text is printed in a centering form on the receipt.
Procedure
Program each item as follows:
• RECEIPT LOGO (Use the character entry)
Logo text for the receipt (max. 30 characters x 6 lines)
NOTE
The register provides the following patterns of receipt logo, and the default is the pattern 6.
At the default, the fi rst 3 lines are used as header, and the last 3 lines are used as footer.
Pattern 1: 3 line text header
Pattern 2: Image logo header
Pattern 3: Image logo header + 3 line text footer
Pattern 4: 6 line text header
Pattern 5: Image logo header + 3 line text header
Pattern 6: 3 line text header + 3 line text footer
To change the receipt logo pattern, consult your authorized SHARP dealer.
Some programmed text may not be printed depending on the pattern.