Operation Manual

186
■
Key Sequence
Procedure
Select “7 AUTO KEY MODE” from
the mode selection window.
▼
1.
In the mode selection window, select “7 AUTO KEY MODE”.
• The AUTO KEY window will appear.
▼
2.
Select the pertinent AUTO key from the key list.
▼
3.
Select “2 KEY SEQUENCE”.
▼
4.
Enter the key data and press the
E
key.
Your register allows to program up to 50 key operations.
<Key type> <Key data>
Function key: Key code* (up to 3 digits: 1 to 136)
Department key: Department code (4 digits: 00XX)
PLU key: PLU code (5 digits: XXXXX)
* See “Function key list” on the next page.
5.
To terminate the procedure, press the
A
or
c
key. When
you press the
c
key, the confi rmation window will appear for
data saving.
Select “SAVE” or “ABANDON”.
Example
In case of the X1 General report printing
Key operation Programmed key
17
Em
key
4
E3
key
To select X1/Z1 MODE
20
EE
key
2
E1
key
To select READING
20
EE
key
2
E1
key To select GENERAL
A