Operation Manual

208
■
Send item (continued)
• STOCK (Use the selective entry)
YES: Sends the PLU/EAN stock report.
NO: Does not send the PLU/EAN stock report.
• CLERK Z1 (Use the selective entry)
YES: Sends the clerk Z1 report.
NO: Does not send the clerk Z1 report.
• CLERK Z2 (Use the selective entry)
YES: Sends the clerk Z2 report.
NO: Does not send the clerk Z2 report.
• CASHIER Z1 (Use the selective entry)
YES: Sends the cashier Z1 report.
NO: Does not send the cashier Z1 report.
• CASHIER Z2 (Use the selective entry)
YES: Sends the cashier Z2 report.
NO: Does not send the cashier Z2 report.
• HOURLY (Use the selective entry)
YES: Sends the hourly report.
NO: Does not send the hourly report.
• DAILY NET (Use the selective entry)
YES: Sends the daily net report.
NO: Does not send the daily net report.
■
Report
Procedure
▼
1.
In the mode selection window, select “9 iSDC MODE”.
2.
Select “2 SETTING”.
3.
Select “3 REPORT”.
4.
Program each item as follows:
• STACKED1 (Use the character entry)
PRINT: Prints all reports included in the stacked report 1
are printed.
NOT PRINT: Does not print the reports.
• STACKED2 (Use the character entry)
PRINT: Prints all reports included in the stacked report 2
are printed.
NOT PRINT: Does not print the reports.