Operation Manual

212
EAN-8
• Ordinary EAN-8 code (fl ag: neither 0 nor 2) <used in the source
marking>
For entry, a full 8 digits number must be entered.
• Internal code (fl ag 2) <in-store marking non-PLU short type>
Program the format in “EAN NON-PLU” in ARTICLE setting.
• Internal code (fl ag 0) <in-store marking PLU short type>
For entry, a full 8 digits number must be entered. On the
receipt/journal, non-PLU type code is printed like 208**** (****:
price/quantity information)
2
(Free format)
0
(Free code)
Program the format in EAN NON-PLU.
Maker code
Item codeNation code
EAN-13
• Ordinary EAN-13 code (used in the source marking)
For entry, you must enter a full of 13 digits number.
(Free format)
Program the format in EAN NON-PLU
Flag
02, 20-29
Maker code
Nation code
Item code
• Internal code (used in the in-store marking, the fl ag character
number: 20 through 29 and 02)
Program the format in “EAN NON-PLU” in ARTICLE setting.
ITF-14
Maker code
Nation code
Item code
P.I
■
Add-on code
UPC-A and EAN-13 may be followed by a two digits number or a fi ve digits number as add-on code,
excepting UPC-A without a check digit plus two or fi ve digits add-on code.
Therefore, the total number of digits enterable for sales entries are as shown below:
Code entry No add-on code 2-digit add-on code 5-digit add-on code
UPC-A 12 14 17
UPC-A w/leading zero 13 15 18
UPC-A w/o check digit 11 – –
UPC-E 6 – –
EAN-8 8 – –
EAN-13 13 15 18