Operation Manual

89
7
Manager Mode
The manager mode is used when managerial decisions must be made concerning register entries, for
example, for overriding limitations and for other various non-programming managerial tasks.
NOTE
Normal register operations may also be performed in this mode.
Some entries described in the following sections require optional keys. When you need optional keys for
these entries, consult your authorized SHARP dealer.
Entering the Manager Mode
To enter the manager mode, use the following procedure in the REG mode:
Procedure
The secret code entry box will appear.
Manager code Secret code
When “0” is programmed for the secret code
JE
Example
Display
If the code is correct, the register enters the manager
mode.
Override Entries
Programmed limits (such as maximum amounts) for functions can be overridden by placing the register in
the manager mode.
Example
This example presumes that the register has been programmed not to
allow coupon entries over 2.00.
Key operation Print
REG-mode entries
3
U
250
-
.......
Error
l
(Manager code)
J
250
-
A
To enter the
manager mode
Returns to the
REG mode.