Specifications

Authorised Transmission

5. Security

Functions

Using the operation panel to activate Authorised

Transmission

Follow the steps below to activate (or deactivate) the Authorised Transmission

function using the operation panel.

♦ At least one supervisor must be stored before Authorised Transmission can

be activated.

1 Press , then until [AUTH. TRANSMISSION]

appears.

• If the display shows [ENTER PASSWORD] after you press

, enter the administrator code and press .

2 Press .

Display: [ACTIVATE AUTH. TX]

3 Press (ON) to activate the function, or (OFF) to deactivate the

function.

• If [SETUP APPROVER] appears, you must first store a supervisor as

expained on page 92.

4 Press to exit.

SECURE

START

STOP