Specifications

Option Settings
140
NUMBER OF
RINGS
This sets the number of rings on which the machine answers calls
when the reception mode is set to AUTO. Enter any number from
2 to 4.
Initial setting: 2 rings.
TRANSACTION
LIST
This sets the condition for printing transaction reports (see page
145). Press a number key as follows:
(ALWAYS PRINT): Print after every fax transmission,
reception and error.
(ERROR/MEMORY): Print only after an error or memory
operation.
(SEND ONLY): Print after every fax transmission.
(ERROR ONLY): Print only when an error occurs.
(NEVER PRINT): Never print.
Initial setting: ERROR ONLY
DIAL MODE
This sets the dial mode. If you are on a tone dial line, press
(TONE). If you are on a pulse dial line, press (PULSE).
Initial setting: TONE
DISTINCTIVE
RING
If you subscribe to a distinctive ring service as explained on page
138, press (YES) to turn on the distinctive ring function. In
addition, set the reception mode to AUTO. If you do not subscribe
to a distinctive ring function, press (NO).
Initial setting: NO
FAX SIGNAL
RX
If you hear a soft fax tone after the machine rings and you answer
on the machine’s handset, the machine will automatically begin
reception. If desired, you can turn automatic reception off. Press
(YES) to turn on the the automatic reception function, or
(NO) to turn off the function. If you select NO, you must start
reception manually by pressing on the machine each time
you hear a soft fax tone after answering a call.
Initial setting: YES
START