Specifications

Option Settings
141
9. Option
Settings
POLLING
If you wish to use a Rapid Key as a polling key, press (YES),
press the Rapid Key that you wish to use (any Rapid Key not
already in use), and then press .
If you do not wish to use the polling function, press (NO).
Note: When a Rapid Key is used as the polling key, it cannot be
used for Rapid Key Dialling.
Initial setting: NO
AUTO PRINT
OUT
Press (YES) to have the machine automatically print an
Activity Report once every 40 send/receive operations. (The
report can still be printed manually at any time.) Press (NO)
to turn off Auto Print Out.
Initial setting: NO
ECM MODE
Press (YES) to have any distortions in a transmission due to
noise on the telephone line automatically corrected before print-
out at the receiving end. This is only effective when the other
machine has ECM as well. Press (NO) to turn off ECM mode.
(When there is considerable noise on the line, you may find that
ECM slows transmission. Turning off ECM mode may increase
transmission speed.)
Initial setting: YES
DIAL TONE
DETECTION
Press (YES) to have the machine verify the presence of a
dial tone on the line before automatic dialling. Press (NO) to
turn this function off.
Note: If you select YES and find that the machine is unable to dial,
change the setting to NO.
Initial setting: NO
KEY TONE
Press (ON) to have the machine sound a beep each time a
key is pressed on the operation panel (this confirms that the key
has been correctly pressed). Press (OFF) to turn off the beep
sound.
Initial setting: ON
START