Specifications

Messages and Signals
162
HEATER HIGH /
HEATER LOW /
LASER ERROR
If this message appears, unplug the power cord and
then plug it back in. If the message still appears, call for
service.
LINE ERROR Transmission or reception was not successful. Press
to clear the message and then try again. If the
error persists, see Line error on page 156.
M: xx% This shows the percentage of the machine’s memory
currently in use.
M#xxx This appears while a document is being scanned and
indicates the memory number assigned to the job (the
number appears in “xxx”). This number appears when
you check or cancel a job with the key (page 70).
MEMORY FULL If faxes have been received to memory because printing
is not possible, resolve the problem so that printing can
continue (see Reception to Memory on page 73).
If faxes are being held in memory because the Secure
Fax function has been activated, print the faxes as
explained on page 88.
If you are attempting to broadcast or transmit from
memory, see If the memory becomes full on page 115.
If you are copying, see If MEMORY FULL appears on
page 113.
OUT OF PAPER /
PRINT CANCELED
Printing was canceled because the tray is out of paper.
Press any key to clear the message, add paper, and
repeat the print job.
PAPER JAMMED The printing paper is jammed. See page 167.
RCVD FAX TRANSFER This appears when the Fax to E-mail/Folder function is
activated (page 122).
RECALLING This appears if you attempt to send a fax by auto dialling
and the line is busy or the receiving fax machine does
not answer. Your machine will automatically reattempt
the call. (See Automatic redialling on page 69.)
STOP
INFO