Specifications

Network Settings
49
2. Network
Scanning
• If you make a mistake, press to move the cursor to the mistake and
enter the correct number.
6 When finished entering the number, press .
7 The next setting will appear in the display. Repeat Steps 4 through 6 to
configure the next setting, or press to exit.
START
STOP
Initialising the network settings
If you need to return the network settings to their initial state, follow the steps
below.
♦ Initialising the settings enables DHCP and clears the IP address and
related settings.
1 Press , then until [NETWORK SETTING] appears.
2 Press , then until [INITIALIZE SETTINGS] appears.
3 Press .
Display: [INITIALIZE SETTINGS] / [IF OK, PRESS START]
4 Press .
FUNCTION
START
START