Specifications

Sending a Fax by Automatic Dialling

Sending a fax by Direct Keypad Dialling

Use this method to dial a full fax number without using the handset.

1 Load the document(s).

• If desired, press to set the

resolution and/or contrast.

2 Enter the number of the receiving machine with the number keys.

• If a pause is required between any of the digits to access a special service

or an outside line, press . The pause appears as a hyphen (two

seconds per pause). Several pauses can be entered in a row.

3 Check the display. If the number shown is correct, press .

• If the number is not correct, press to clear the incorrect digits, and

then re-enter the correct digit(s).

RESOLUTION

REDIAL

START

STOP

Making a voice call with an auto-dial number

Rapid Key Dialling: Lift the handset and press the Rapid Key.

Speed Dialling: Lift the handset, press , and enter the Speed Dial

number with the number keys (the number must be 3 digits: enter “001” for

Speed Dial 1, “010” for Speed Dial 10, etc.).

Search Dialling: Press or until the name or number of the other

party appears, and lift the handset.

(You can also lift the handset first, search for the number, and then press

SPEED DIAL

START