FPK50UW Owners Manual

EN-14

CARE AND MAINTENANCE 1

• To maintain optimum performance of this air purier, please clean the

product including the lter periodically.

• Be sure to stop operation and unplug the product before any maintenance

or replacing accessories.

Gently remove dust from the back panel, using a

vacuum cleaner attachment or similar tool.

Back Panel

MAIN UNIT

Wipe with a dry, soft cloth.

For stubborn stains or dirt, use a soft cloth dampened with warm water.

• Do not use volatile uids.

Benzine, paint thinner, polishing powder, etc. , may damage the surface.

• Do not use detergents.

Detergent ingredients may damage the main unit.

1. Add a small amount of dish detergent to water and

soak for about 10 minutes.

2. Rinse o󰀨 the dish detergent with clean water.

3. Completely dry the lter in a well-ventilated area.

How to clean hard to remove dirt

NOTE

Be careful not to apply too much force to the pre-lter.

FILTER MAINTENANCE SIGN

MAINTENANCE

NOTE

The FILTER MAINTENANCE

SIGN changes from red to

green.

The FILTER MAINTENANCE SIGN will turn red* when it is time to maintain the back panel

(pre-lter) .

*This sign will turn red after approximately 720 hours operating. (30 days × 24 hours = 720 hours)

After maintenance, connect the power plug to the wall outlet and press POWER ON/OFF

button, then PLASMACLUSTER EXPRESS CLEAN button for 3 seconds.

FILTER

MAINTENANCE SIGN

3 sec.

BACK PANEL

(Pre-lter)

When the FILTER

MAINTENANCE SIGN turns red.

OM_FP-K50U_EN.indd 14 2019/09/05 10:14:40