R FU-40SE-K AIR PURIFIER OPERATION MANUAL Tabletop / wall-mounting type
ENGLISH FEATURES Cluster Ion Control The unit controls the ratio of minus cluster ions and plus cluster ions depending on the condition of the room. CONTENTS • Clean mode SAFETY PRECAUTIONS ........................ E-2 Approximately the same amount of plus and minus cluster ions are discharged. This mode is effective for reducing floating mold and household odors in the air. • CAUTIONS CONCERNING THE USAGE OF THIS PRODUCT ....................................
SAFETY PRECAUTIONS • Do not use the unit if the power cord or plug is damaged or the connection to the wall outlet is loose. Electrical shock, short circuit and/or fire may occur as a result. • Do not damage, break, coat, forcefully bend, pull, twist, bundle, pinch or place heavy objects on the power cord. If the power cord is damaged, fire and/or electrical shock may occur as a result. • Use AC 220~240V only. • Do not modify.
CAUTIONS CONCERNING THE USAGE OF THIS PRODUCT • Do not block the intake and exhaust ports. • Do not use the unit near or on hot objects, such as a stove, etc. Also, do not use the unit where it may come into contact with steam. • Do not use the unit on its side. Deformation, malfunction and/or overheating of the motor may occur as a result. • Do not install when there is generation of lampblack, such as in a kitchen, etc. • Do not use detergent when cleaning the unit.
NAMES OF PARTS can not remove the noxious substances (carbon *Itmonoxide etc.) from cigarette smoke.
CLUSTER ION LAMP Cluster ion operation is selected using the remote control. Blue light When the cluster ion operation is in the Clean mode or AUTO cluster ion mode and the air in the room is dirty, the light turns on and the unit will operate in the Clean mode. Green light When the cluster ion operation is in the Refresh mode or AUTO cluster ion mode and the air in the room is clean, the light turns on and the unit will operate in the Refresh mode. Light off No cluster ions are generated.
INSTALLATION WHEN USING THE UNIT ON A TABLETOP FIXING THE STAND WHEN WALL MOUNTING CAUTION 1 Remove the front panel. • When mounting the air purifier on a wall, the wall will become dirty as time passes. To prevent this, place a vinyl sheet, etc., around the unit. • Ensure that the wall is suitable for mounting the air purifier. • Do not install in a location with heavy smoke, such as in a kitchen, etc. The unit surface may crack as a result.
mounting bracket 2 to the 2 Mount main unit Mount the bracket to the back of the main unit using the small screws included. REMOVING THE UNIT Pull the bottom of the unit towards you and then lift. NOTES Mounting bracket 2 • When removing the unit disconnect the power cord. Small screws (2 units) 3 Place the cushions as shown Cushions (2 units) 4 Mount the main unit (1) Align the horizontal positions of mounting brackets 1 and 2 and hook the bracket 2 to bracket 1.
PREPARATION Be sure to remove the power plug from the wall outlet. INSTALLING THE FILTERS To maintain the quality of the filters, they are installed in the main unit within polyvinyl bags. Be sure to remove the filters from the polyvinyl bags before using the unit. 1 Remove the filters 1 Place the unit facing up Place the unit on a table, etc., so that the stand does not touch the surface.
2 Tabs Install the filter HEPA filter the HEPA filter from 1 Remove the polyvinyl bag and install it in the main unit with the display facing up. Insert so that the tabs on the HEPA filter are facing you. Proper operation cannot be achieved if installed incorrectly. Stamina-power carbon the stamina-power car2 Remove bon from the polyvinyl bag and install it in the main unit. Make sure the tabs on the HEPA filter remain visible.
OPERATION For the first 30 seconds after the power plug is inserted into the wall outlet, the unit will check the conditions of the air. If operation is set to ON during this time, the Clean sign lamp will alternately flash in green, orange and red. During this time, the Cluster ion lamp will light blue and the unit will be in the Clean mode.
REMOTE CONTROL OPERATION Operations available with remote control • Fan level manual operation • Fan level AUTO operation • Silent operation • Max operation • Tobacco smoke mode operation • Pollen mode operation • OFF timer setting • Cluster ion select AUTO cluster ion Clean mode Refresh mode * • To start operation, press the ON/OFF button. A short beep will sound and operation will start in the AUTO mode. • To stop operation, press the ON/OFF button again. A long beep will sound and operation will stop.
CARE AND MAINTENANCE (To maintain the best performance of this product, please clean the unit periodically.) When cleaning, be sure to remove the power plug from the wall outlet. In addition, never handle the power plug with wet hands. Electrical shock and/or bodily injury may occur as a result. MAIN UNIT FILTERS For soiling on the main unit and the installed surface, clean as early as possible. Stubborn dirt may be hard to remove.
GUIDE FOR LIFE OF FILTERS The replacement period differs depending on the usage hours and location of installation. • Some of the odor ingredients adsorbed by the filters become separated and are discharged through the exhaust port as odor. Depending on the usage environment, this odor may become strong in several months and the exhaust port may smell. If dust or odors cannot be removed easily, replace the filters.
TROUBLESHOOTING Before calling for repair, check the symptoms below for possible remedies, since the problem may not be a malfunction of the unit.