FU-A80J ENGLISH AIR PURIFIER OPERATION MANUAL Free standing type Device.of.this.mark.is.a.trademark.of.Sharp.Corporation. Plasmacluster.is.a.registered.trademark.or.a.trademark. of.Sharp.Corporation. H_FU-A80J-EN.
Please read before operating your new Air Purifier Some odour ingredients absorbed by the filters may become separated and may be discharged. through. the. air. outlet. and. result. in. additional. odour.. Depending. on. the. usage environment, especially when the product is used in a condition significantly more. severe. than. household. use,. this. odour. may. become. strong. in. a. shorter. period. than.expected. The. air. purifier. is. designed. to. remove. air-suspended. dust. and. odour,. but. not.
ENGLISH Exclusive Combination of Air Treatment Technologies Filtration System + Plasmacluster Ion DECREASES ODOURS Deodorizing Pre filter absorbs many common household odours. REDUCES DUST, POLLEN, DANDER & MOULD* HEPA filter traps 99.97% of particles as small as 0.3 microns.* REFRESHES Plasmacluster refreshes the air similar to the way nature cleans the environment by emitting a balance of positive and negative ions. *From the air that is drawn through the filter system.
IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using the unit. When using electrical appliances, basic safety precautions should be followed, including the following: WARNING - To reduce the risk of electrical shock, fire or injury to persons: • Connect the power plug to a dedicated electrical outlet for 230-240V ~ 50Hz. • Do not use the unit if the power cord or plug is damaged or the connection to the wall outlet is loosened. • Periodically remove dust from the power plug.
CAUTIONS CONCERNING OPERATION • Do not block any opening. • Do not use the unit near or on hot objects, such as stoves or heaters or radiators. • Do not use the unit with the wrong position. • Always hold the handle on both sides of the unit when moving it. • Do not use without filters inside the unit. • Do not wash and reuse the filter. Not only does it not improve filter performance, but also may cause electrical shock or malfunction.
PART NAMES ILLUSTRATIVE DIAGRAM 1 3 4 2 5 6 7 BACK 8 9 1 Air Outlet 2 Air Inlet 3 Handle 4 Main Unit 5 HEPA Filter 6 Deodorizing Pre Filter 7 Dust Sensor 8 Date Label 9 Power Cord 10 Plug INCLUDED 10 •.Operation.manual E-4 H_FU-A80J-EN.
ENGLISH MAIN UNIT DISPLAY 11 12 13 14 15 16 17 11 QUICK CLEAN Button / Quick Clean Indicator Light (green) 12 (Plasmacluster) ON / OFF Button / (Plasmacluster) ON / OFF Indicator Light (green) 13 CLEAN SIGN The.color.changes.according.to.the.air.condition. Green..........Yellow..........Red Clean...............................Very.Impure 14 (Plasmacluster) Sign (blue) 15 FAN SPEED Indicator Light (green) 16 FAN SPEED Button 17 POWER Button E-5 H_FU-A80J-EN.
FILTER INSTALLATION Unplug the electrical cord before performing any maintenance. To maintain the quality of the filters, they are installed in the main unit and packed in plastic bags. Be sure to remove the filters from the plastic bags before using the unit. 1 Remove the front Panel. . 4 Fix the Front Panel. . Gently.grip.the.bottom.of.the.front.panel. and.remove.it.by.pulling.the.bottom.gently. toward.you. Fix.the.Front.Panel.by.hooking.it.into. the.top.of.the.unit..Swing.panel.in.by. pushing.
OPERATION 1 Press 2 Press 2 1 to start / stop. Unless.the.power.cord.has.been.unplugged,. the. operation. starts. in. the. previous. mode. it. was.operated.in. CLEAN SIGN The.Dust.Sensor.automatically.monitors dust pollution level and adjusts fan.speed.accordingly. ENGLISH 3 to select fan speed. FP-A80U Green Yellow Clean Red Very.Impure AUTO mode *The air purifier operates the airflow speed automatically.according.to.the.interior. pollution.level.detected.by.the.sensor.
MAINTENANCE Care Cycle : Whenever dust accumulates on the unit or every 1 month. CLEANING THE FILTERS off the unit, and unplug the 1 Turn power cord. 2 Remove the Front Panel. (Refer to E-6) 3 Clean the filter and Dust sensor. Gently remove dust from the filter, using a vacuum cleaner with attachment or similar tool. CLEANING THE UNIT Wipe with a dry, soft cloth. For stubborn stains or dirt, use a soft cloth dampened with warm water. Do not use volatile fluids and detergents.
FILTER REPLACEMENT GUIDELINES Filter life varies depending on the room environment, usage, and location of the unit. If dust or odour persists, replace the filter.
TROUBLESHOOTING Before calling for service, please review the Troubleshooting chart below, since the problem may not be a unit malfunction. PROBLEM SOLUTION (not a malfunction) The unit leaves smoke and odours in the air. • Clean or replace the filters as needed. (Refer to E-9) • Is the unit installed in a location that is difficult for the sensor to detect cigarette smoke? • Are the dust sensor openings blocked or clogged? (In this case, clean the openings.
FOR CUSTOMER ASSISTANCE WARRANTY Consumer Electronic Products Congratulations on Your Purchase! ENGLISH This Sharp product is warranted against faults in material and manufacture for the period as stated in the table below. If service is required during the warranty period, please contact your nearest Sharp Approved Service Centre. These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.
FOR CUSTOMER ASSISTANCE FOR LOCATION ENQUIRIES WITHIN AUSTRALIA REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE VISIT OUR WEBSITE AT www.sharp.net.au OR CALL SHARP CUSTOMER CARE 1300 135 022 (LOCAL CALL COSTS APPLY WITHIN AUSTRALIA) SHARP CORPORATION OF AUSTRALIA PTY LTD FOR LOCATION ENQUIRIES WITHIN NEW ZEALAND REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE VISIT OUR WEBSITE AT www.sharp.net.
SPECIFICATIONS Model FU-A80J 230-240V 50 Hz Fan Speed Adjustment Fan Speed Operation MAX MED LOW Rated Power (W) 75 20 5 Fan Speed (m3/hour) 480 300 120 Noise Level (dBA) 53 41 23 Recommended Room Size *1 62m2 Sensor Dust Filter type ENGLISH Power supply HEPA filter / Deodorizing Pre filter Cord Length 2.0m Dimensions 402mm (W) × 245mm (D) × 620mm (H) Weight 8.0 kg *1 Size of a room which is appropriate for operating the unit at maximum fan speed.
SHARP CORPORATION OF AUSTRALIA PTY.LTD. A. B. N. 40 003 039 405 1 HUNTINGWOOD DRIVE, HUNTINGWOOD, N.S.W. 2148 P.O.BOX 6827, BLACKTOWN. N.S.W. 2148 SHARP CORPORATION OF NEW ZEALAND LIMITED 59 HUGO JOHNSTON DRIVE PENROSE, AUCKLAND Printed in Thailand TINS-A499KKRZ 11J- TH 1 H_FU-A80J-EN.