Operating instructions
E-12
SWING
SLEEP
LIGHT HUMID
AIR
TIMER ON TIMER OFF ANION SAVE
OPER
FAN
MODE ON/OFF
SWING
SLEEP
LIGHT HUMID
AIR
TIMER ON TIMER OFF ANION SAVE
OPER
FAN
MODE ON/OFF
HEAT mode operation
1
Press the ON/OFF button.
2
Press the MODE button to select
HEAT( ) mode.
3
Press the SWING button. The louvers
will swing, and stop when repress.
4
Press the FAN button to select fan
speed.
5
Press the Temperature button to set
the desired temperature.
• If room temperature is higher than set temperature, compressor and outdoor fan motor
stop, only indoor fan motor runs.
• The temperature can be set within the range of 16˚C to 30˚C.
1
2
5
3
4
COOL mode operation
1
Press the ON/OFF button.
2
Press the MODE button to select
COOL( ) mode.
3
Press the SWING button. The louvres
will swing, and stop when repress.
4
Press the FAN button to select fan
speed.
5
Press the Temperature button to set
the desired temperature.
• If room temperature is lower than set temperature, compressor stops and only indoor fan
motor runs.
• The temperature can be set within the range of 16˚C to 30˚C.
1
2
5
3
4
REMOTE CONTROLLER OPERATION
GREE_cassette_eng.indd 12 08.10.28 11:42:43 AM