Operating instructions
E-17
ENGLISH
CARE AND MAINTENANCE
How to clean the air lter
1
Open the suction grille
Unscrew the two screws.
Slide both knobs simultaneously as shown
and pull them downward slowly.
2
Remove the air lter
Slide knobs on the back of the suction grille
outward and remove the air lter.
Then remove three air cleaners on it.
3
Clean the air lter
Use a vacuum cleaner to remove dust. If the
lter is dirty, wash it with warm water and a
mild detergent. Dry lter in the shade before
reinstalling.
• Do not clean with hot water.
• Do not dry over re.
• The suction grille must be opened by
skilled personnel.
4
Fix the air lters
• Fix three air cleaner on the air lter and
then x the air lter to the suction grille by
hanging it to the projected portion above
suction grille.
• Set air lter by sliding the knob on the back
of the suction grille inward.
5
Close the suction grille. (Refer to step 1.)
Warning
• Be sure to disconnect the power cord from the wall outlet or turn off the circuitbreaker before
performing any maintenance.
Screws
GREE_cassette_eng.indd 17 08.10.28 11:42:44 AM