Operating instructions

E-27
ENGLISH
Caution
1. Improper screwing of the screws may cause the troubles.
2. If gap is still left between the ceiling and the panel after screwing the screws, readjust height of
the indoor unit.
• After xing be sure no gap left between the ceiling and the panel
3. Wiring of the panel.
Connect the joints for swing ap motor lead wire installed on the panel to the joints on the indoor
unit.(2 places)
Air leak
Air leak from ceiling
Contamination dew condensation, dew dripping
No gap is allowed
Adjustment indoor unit from the holes in the
corner of the panel is possible if the indoor
unit is kept leveled and the drainage pipe
piping etc is unaffected.
Indoor unit
Indoor unit
Panel
Panel
GREE_cassette_eng.indd 27 08.10.28 11:42:47 AM