User's Manual

Installing and Charging the Battery
8
Installing and Charging the Battery
1 Connect the battery connector þ1 Connect the battery connector (➊), and then place the battery pack in
the cordless handset (
➋).
• Place the wires as shown.
2 Place the battery cover on the cordless
handset, making sure it snaps firmly
into place.
• Make sure that the wires are not caught
or pinched by the cover.
3 Place the cordless handset in the base
with the dial pad facing forward.
• Important! The dial pad must face
forward, or the battery will not charge.
• The battery charges automatically while
the cordless handset is in the base.
While charging, the display shows
CHARGING.
• The cordless handset and base may
feel warm while charging. This is
normal.
Note: The battery cannot be overcharged. When not using the cordless
handset, keep it in the base to ensure that it is always charged.
Charge the battery
at least
10 hours
the first time!
Black
Red
Black
Red
IN
U
SE
/
C
HA
R
GE
PAG E
all.bookPage8Wednesday,April24,20029:49AM