User Manual

ManualsBrandsSHARP ManualsHiFi AudioHT-CN300H

– 1 –

HT-CN300H

HOME CINEMA COMMAND

TINSE0015BGZZ

02F Y HK 1

This Quick Guide will help you to correctly install

and operate your system.

Accessories

Remote control × 1

AM loop aerial × 1

FM aerial × 1

Remote control sensor × 1 Double-sided tape for

remote control sensor × 1

SCART adaptor × 2

(IN/OUT)

AC adaptor for

remote control × 1

Labels for

remote control × 1

Video cable × 1

Speaker cushion × 20

Speaker connection lead × 5

White

Front (left): 5 m (15')

Green

Centre: 5 m (15')

Red

Front (right): 5 m (15')

Blue

Surround (left): 15 m (45')

Grey

Surround (right): 15 m (45')

OUT

If you require any advice or assistance regarding

your Sharp product, please visit our web-site

www.sharp.co.uk/support.

Customers without Internet access may telephone

08705 274277 during office hours (or (01) 676 0648

if telephoning from Ireland).

0101

Summary of content (8 pages)

PAGE 1
This Quick Guide will help you to correctly install and operate your system. If you require any advice or assistance regarding your Sharp product, please visit our web-site www.sharp.co.uk/support. Customers without Internet access may telephone 08705 274277 during office hours (or (01) 676 0648 if telephoning from Ireland).
PAGE 2
Speaker connections Connect the cables to the sockets of matching colours.
PAGE 3
Speaker layout The best surround effect will be achieved by placing each speaker at the same distance from the listening position. Front speaker (left) Centre speaker Front speaker (right) Main unit (subwoofer) Surround speaker (right) Surround speaker (left) Centre speaker Same distance Front speaker (left) 10 cm (4") 10 cm (4") Same distance Front speaker (right) Main unit (subwoofer) Notes: ● Place the TV halfway between the front speakers.
PAGE 4
5 Connecting other equipment One video cable and two SCART adaptors are supplied. Connecting the TV To video input socket Video cable (supplied) S-video cable TV To S-video input socket Connecting the TV with SCART socket: TV Use a supplied SCART adaptor (IN).
PAGE 5
Connection example using a SCART adaptor: To SCART socket To SCART socket SCART adaptor (OUT) SCART adaptor (IN) OUT R AUDIO L To audio output sockets Audio cable VIDEO To video output socket L VIDEO To video input socket Video cable Video cable 6 Audio cable To audio input sockets IN R AUDIO Plugging in the main unit and the remote control Wall socket (AC 230 V, 50 Hz) Wall socket (AC 230 V, 50 Hz) To 3.
PAGE 6
Listening to the radio 1 Press the TUNER/BAND button repeatedly to select the desired frequency band (FM ST, FM or AM). 2 Press the or button to tune in to the desired station. When the or button is pressed for more than 0.5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station. ST To receive an FM stereo transmission: Press the TUNER/BAND button to display the "ST" indicator. " " will appear when an FM broadcast is in stereo.
PAGE 7
Memorising operations in the Memory 2 buttons for other equipment You can assign only one function to each button. If you assign two functions to the button, the newer one will be memorised (learn function). 1 Set the MEMORY 1/2 selector switch to MEMORY 2. 2 Move the LEARN/TRANSMIT selector switch to LEARN. The red learn indicator will light up. Though the red and green learn indicators light up alternately after approx. 15 seconds, you can go on to the next step.
PAGE 8
Memorising operations in the Memory 1 buttons for other equipment: Set the MEMORY 1/2 selector switch to MEMORY 1 and perform steps 2 - 6 in "Memorising operations in the Memory 2 buttons for other equipment". Memorising operations in the operation buttons for other equipment: 1 Move the LEARN/TRANSMIT selector switch to LEARN. Registrable buttons 2 Press down the desired button on the remote control for 2 seconds or more.