HT-CN650DVW E HOME THEATER WITH DVD F ON STAND-BY PRESET OPEN CLOSE MUTE PRESET SLOW PLAY PAUSE OSD TUNING STOP TUNING FUNCTION SETUP ENTER MENU PBC 1 2 4 5 7 8 TITLE RETURN 3 S 6 9 EQUALIZER PROG 0 MIC ECHO LISTENING MODE VOLUME AUDIO SUBTITLE ZOOM ANGLE SLEEP DIRECT REPEAT A-B MODEL V HT-CN650DVW I N OPERATION MANUAL P E 61 03/10/29 HTCN650DVW_AUS.
HT-CN650DVW Introduction Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. HT-CN650DVW Home Theater with DVD consisting of HT-CN650DVW (main unit), CP-CN650F (front speakers), CP-CN650C (centre speaker), CP-CN650R (surround speakers) and CP-CN650SW (subwoofer).
Contents System Connections Speaker connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 - 13 Aerial connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Connections to TV, VCR, etc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 - 17 Preparation for Use System installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HT-CN650DVW Types of playable discs The DVD player can play back discs bearing any of the following marks: Disc type DVD Video Disc Disc contents Audio and video (movies) Disc size 12 cm (5") 8 cm (3") Super Video CD Audio and video (movies) 12 cm (5") 8 cm (3") Types of playable DVD discs vary depending on the region. This unit can play back only DVDs with the same region number are written on the back of the unit.
Accessories HT-CN650DVW E Please confirm that the following accessories are included. F Remote control × 1 “AAA” size battery (UM-4, R03, HP-16 or similar) × 2 FM aerial × 1 Green and Black (for centre speaker) approx. 3 m White and Black (for left front speaker) approx. 3 m Blue and Black (for left surround speaker) approx. 8 m Red and Black (for right front speaker) approx. 3 m Grey and Black (for right surround speaker) approx.
HT-CN650DVW Precautions General Please ensure that the equipment is positioned in a well ventilated area and that there is at least 10 cm (4") of free space along the sides and back. There must also be a minimum of 15 cm (6") of free space on the top of the unit. 10 cm (4") 10 cm (4") 15 cm (6") - Precautions - General Information 10 cm (4") The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.
Description of discs HT-CN650DVW Discs that cannot be played DVDs without the region number on the back of the unit or “ALL”. DVDs with SECAM system DVD-ROM DVD-RAM DVD-Audio E Icons used on DVD discs CDG CDV Photo CD CD-ROM SACD Discs recorded in special formats, etc. The discs above cannot be played at all, or no sound is heard although images appear on the screen or vice versa.
HT-CN650DVW Controls and indicators Main unit (front panel) 2 1 3 4 5 6 7 8 9 10 - Controls and indicators - General Information 13 15 11 12 16 17 18 19 20 14 21 22 23 24 25 26 27 28 29 30 31 32 Reference page 1.On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19, 20 2.Disc Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 3.Disc Tray Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . .
HT-CN650DVW E Main unit (rear panel) 1 2 3 4 5 6 F 8 9 10 Reference page 1. AC Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 2. Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 3. Audio Input Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 4. Audio Output Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14, 15 5.
HT-CN650DVW Controls and indicators (continued) Remote control 1 2 3 4 5 ON STAND-BY OPEN CLOSE 22 PRESET MUTE PRESET SLOW PLAY PAUSE OSD TUNING STOP TUNING 7 - Controls and indicators - General Information 6 8 9 10 11 12 26 FUNCTION SETUP ENTER MENU PBC 27 28 TITLE RETURN 29 30 1 2 3 13 4 5 6 7 8 14 EQUALIZER 9 PROG MIC LISTENING 16 ECHO MODE 18 19 20 21 31 0 15 17 23 24 25 32 VOLUME 33 34 AUDIO SUBTITLE ZOOM ANGLE SLEEP DIRECT REPEAT A-B 35 36 37 Re
HT-CN650DVW Front/surround speakers E Subwoofer 2 F 3 1 S Centre speaker 1 2 3 Reference page 1 1. Bass Reflex Duct 2. Woofer 3. Speaker Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3 Speaker functions Front speaker: Reproduces left and right sound (stereo mode) or front surround sound. 2 Centre speaker: Reproduces centre surround sound. Reference page 1. Speaker 2. Super Tweeter 3. Speaker Terminals . . . . . . . . . . . . . . . . .
HT-CN650DVW Speaker connection Speaker terminals on the main unit and speakers, and speaker wires are distinguished by colours. Connect the speaker and the unit by matching the colours. (For speaker installation, see page 18.
Aerial connection Connecting speaker wires To prevent accidental short circuits between and terminals, connect the speaker wires to the speakers first and then to the unit. Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire in the direction where the strongest signal can be received. FM aerial F Note: Red (+) External FM aerial: Connect the other end to the main unit. Use an external FM aerial if you require better reception. Consult your dealer.
HT-CN650DVW Connections to TV, VCR, etc. Audio connection from TV or VCR Caution: You can enjoy surround sound from TV or VCR by connecting them to the unit as shown. Turn off all other equipment before making any connections. TV Audio signal Connecting to a TV with a video input socket Audio cable (supplied) - Connections to TV, VCR, etc.
HT-CN650DVW E Connecting to a TV with Progressive-scan capability Your TV must be capable of handling progressive scanning and have component video input capability. F *Component video cable (not supplied) To COMPONENT VIDEO INPUT sockets Red White Blue Green Green Red To audio input sockets R L AUDIO INPUT Y PB PR COMPONENT VIDEO INPUT TV with progressive-scan capability - Connections to TV, VCR, etc.
HT-CN650DVW Connections to TV, VCR, etc. (continued) Interlaced scanning Progressive Scanning - Connections to TV, VCR, etc. - System Connections Progressive scanning Whilst interlaced scanning produces one frame of video in two fields, progressive scanning creates one frame in one field. Conventional interlaced scanning constitutes one second with 30 frames (60 fields), but progressive scanning constitutes it with 60 frames from scratch.
HT-CN650DVW E To listen to TV or VCR sound via the speakers of this unit: Press the FUNCTION button repeatedly to select the desired audio input. 1 Unit display ESET PRESET MUTE CHP PROG SLEEP REPEAT 1 A - B KHz MHz PRESET SLOW PLAY PAUSE OSD TUNING STOP TUNING F “AUX 1” or “AUX 2”.
HT-CN650DVW System installation Placing the speaker system Notes: The best surround effect will be achieved by placing each speaker at the same distance from the listening position. It is recommended to arrange the speakers as shown below. Front speaker (left) Centre speaker Front speaker (right) Place the TV halfway between the front speakers. It is recommended that the centre speaker be placed near the television.
Battery installation Turning the power on 1 Open the battery cover. 2 Insert the supplied batteries according to the direction indicated in the battery compartment. When inserting or removing the batteries, push them towards the terminals. battery 3 Close the cover. HT-CN650DVW Test of the remote control E Check the remote control operation after making all the connections (see pages 12 18). Point the remote control directly at the remote sensor on the unit.
HT-CN650DVW Changing the setup menu Turn on the TV, and switch the input to the “VIDEO 1”, “VIDEO 2”, etc. accordingly. ON STAND-BY ON STAND-BY PRESET FUNCTION PLAY PAUSE OSD TUNING STOP TUNING FUNCTION SETUP ENTER Press the / or - button to select a menu and press the ENTER button. See the list on pages 21 - 25 for setup menu. PRESET SLOW Press the SETUP button. 4 SETUP Press the 8, 9, ; or : button to change the setting and press the ENTER button.
HT-CN650DVW Change the system with conventional TV connecting E If you use a conventional TV, you must select the INTERLACE at “Video Setup Page” (see page 22). INTERLACE mode is use for normal video output. For conventional TV connection, please refer to page 14. Change the system to a TV with Progressive-Scan If you use TV with Progressive-Scan capability and connect it to the COMPONENT VIDEO OUT sockets of the DVD main unit (see page 15), you must select the PROGRESSIVE-SCAN (P-SCAN).
HT-CN650DVW Changing the setup menu (continued) Setup menu VIDEO SETUP PAGE Selectable parameters (* indicates default setting) TV MODE P-SCAN - Changing the setup menu - Preparation for Use INTERLACE* PREFERENCE PAGE HDMI SETUP HDMI SETUP DivX VOD HDCP SETUP VIDEO FORMAT OK TV TYPE PBC AUDIO SUBTITLE PAL* AUTO NTSC ON* OFF ENGLISH* FRENCH SPANISH CHINESE JAPANESE KOREAN RUSSIAN THAI ENGLISH FRENCH SPANISH CHINESE JAPANESE KOREAN RUSSIAN THAI OFF* OFF* 480p (60Hz) 720p (60Hz) 1080i (60Hz) 576p
HT-CN650DVW EXIT SETUP PASSWORD CHANGE E Description Select the disc menu language. F Set a restriction level for DVD viewing (for details, see page 25). S This resets all settings, except for PARENTAL and PASSWORD, to the factory defaults. See page 25 for password setting. The setting is completed.
HT-CN650DVW Changing the setup menu (continued) TV display setting Indicator NORMAL/PS - Changing the setup menu - Preparation for Use NORMAL/LB Setting When playing a wide image (16:9) disc, the left and right sides of the image are cut (pan scan) to display a naturallooking 4:3 size image. A wide image disc without pan scan is played back in 4:3 letterbox. A 4:3 disc is played in 4:3.
HT-CN650DVW English French CAST ACTEURS STAFF PERSONNEL Parental setting 1 Select “PREFERENCES” on the setup menu screen (see steps 1 - 3 on page 20). 2 3 After selecting “PARENTAL” in step 4 on page 20, select the parental level and press the ENTER button. Password setting F 1 Enter the old password using the Direct Number buttons. (If this is the first time, enter “000000”) 2 3 Enter the new password using the Direct Number buttons. Enter the new password again for confirmation.
HT-CN650DVW General control Volume control Unit Display Press the VOLUME + (VOLUME 8) button to increase the volume and the VOLUME − (VOLUME 9) button for decreasing. TITLE TRK PRESET CHP PROG SLEEP REPEAT 1 A - B DIGITAL Pro Logic KHz MHz STEREO VCD MP3 MIN 2 ..... 38 1 39 MAX Treble and Bass Unit Display ON STAND-BY OPEN CLOSE MUTE 1 Press the MODE button repeatedly to select the TREB or BASS.
DVD playback HT-CN650DVW Turn on the TV, and switch the input to the “VIDEO 1”, “VIDEO 2”, etc. accordingly. Playback 1 Press the ON/STAND-BY button to turn the power on. 2 When the input is not set to the disc mode, press the FUNCTION button repeatedly to display the startup screen. E No Disc F The startup screen appears. PRESET STOP OPEN CLOSE MUTE OPEN CLOSE Place the disc on the disc tray, label side up.
HT-CN650DVW DVD playback (continued) To interrupt playback Press the PLAY/PAUSE ( ) button. To resume playback from the same point, press the PLAY/PAUSE ( ) button. To resume playback after stopping (resume play) You can resume playback from the point playback is stopped. To stop playback 1 DVD/VCD/SVCD/DivX: Press the STOP ( ) button twice.
Basic operation ON STAND-BY HT-CN650DVW PRESET E Fast forward/Fast reverse (search) OPEN CLOSE PRESET PRESET MUTE PRESET You can search the desired point as you play the disc. SLOW PLAY PAUSE OSD TUNING STOP TUNING PLAY PAUSE 1 FUNCTION SETUP ENTER MENU PBC or F button.
HT-CN650DVW Basic operation (continued) 2 Enter title or chapter number with the Direct Number buttons. 3 To specify title or track 1, enter “01” (must use 2 digits). If you enter the wrong numbers, press , or 9 button to select the concerned track and then re-enter the new numbers. To clear all the numbers those entered, press 9 button to select “Reset” and then press ENTER button. TV screen Press 9 button to select “Start” and then press ENTER button to start playback the programmed track(s).
Useful operation MUTE 1 PRESET SLOW PLAY PAUSE OSD TUNING STOP TUNING FUNCTION PLAY PAUSE Whilst a disc is playing, press the SLOW select the desired speed. TITLE RETURN 1/4 2 3 4 5 6 7 8 1/8 1/16 PLAY (Normal play) S 1/16 1 F SLOW forward play 1/2 ENTER button repeatedly to On DVD, the speed changes as follows: SETUP MENU PBC E You can slow down the playback speed.
HT-CN650DVW Useful operation (continued) ON STAND-BY PRESET To change the angle OPEN CLOSE MUTE You can change the angle of view when playing a DVD disc that contains scenes recorded from multiple angles. PRESET SLOW PLAY PAUSE OSD TUNING STOP TUNING FUNCTION When “ ” is displayed in the upper right corner of the TV screen, press the ANGLE button repeatedly to select the desired angle number.
HT-CN650DVW ON STAND-BY 1 OPEN CLOSE E Whilst a disc is playing, press the REPEAT button. TV screen PRESET MUTE SLOW PLAY PAUSE OSD TUNING STOP TUNING FUNCTION MENU PBC CHAPTER ENTER F REP 1 STOP Each time the button is pressed, the repeat play mode changes in the following order. The repeat play mode changes as follows on DVD: SETUP MENU PBC Unit display PRESET TITLE RETURN “REP 1” Repeat the currently playing chapter. TITLE” “REP” Repeat the currently playing title.
HT-CN650DVW Useful operation (continued) To play the contents between the specified points repeatedly (A-B repeat) To select a title from the top menu of the disc On a DVD with multiple titles, you can select a title from the top menu. You can play the desired portion repeatedly by specifying it during playback. 1 1 Whilst a disc is playing, press the A - B button.
Various settings HT-CN650DVW The subtitle language, audio language and TV type you select during playback are reset each time you set this unit to the stand-by mode or switch the input. To keep your own settings, set them in the setup menu (see page 20). ON STAND-BY PRESET OPEN CLOSE MUTE PRESET SLOW PLAY PAUSE OSD TUNING STOP TUNING You can change the subtitle language or hide subtitles during playback.
HT-CN650DVW Various settings (continued) To change the audio channel DVD: You can select an audio channel. Current title number Total number of chapters Whilst a disc is playing, press the AUDIO button repeatedly to select the desired audio channel.
Video CD and Super Video CD playback ON STAND-BY STOP Press the MENU/PBC button with PBC ON. The menu will appear on the TV and playback will be paused. 2 Example 1 2 Select the desired menu number using the Direct Number buttons. Playback starts. After playback stops, the menu will reappear. Select the menu number to play. OPEN CLOSE PRESET To interrupt playback: PRESET PRESET 1 MUTE Press the PLAY/PAUSE button.
HT-CN650DVW Video CD and Super Video CD playback (continued) SLOW PLAY PAUSE OSD TUNING STOP TUNING To play by specifying time (time search): SETUP Cancel the P.B.C. (playback control). MENU PBC ENTER MENU PBC 1 TITLE RETURN During stop, press the DIRECT button.
CD operation HT-CN650DVW ON STAND-BY PRESET OPEN CLOSE MUTE PRESET SLOW PLAY PAUSE OSD TUNING STOP TUNING FUNCTION ENTER MENU PBC 1 2 4 5 7 8 6 1 2 4 5 Programmed contents will be cleared when you perform the following operations: Switch the input or remove the discs. Set to the stand-by mode. 6 7 8 9 To start playback from the desired point (direct play) 3 To select and play the desired track: 0 9 EQUALIZER Repeat the above procedures from step 1.
HT-CN650DVW MP3/WMA, JPEG and DivX disc operation The following playback functions are the same as DVD or VCD operations. ON STAND-BY PRESET - MP3/WMA, JPEG and DivX disc operation - CD, CD-R and CD-RW Operation Page Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 To locate the beginning of a chapter (track) (skip) . . . . . . . . . . . . . . . . . . . . . . 29 Fast forward/Fast reverse (search) . . . . . . . . . . . . . . .
HT-CN650DVW ON STAND-BY To play repeatedly (repeat play) OPEN CLOSE E Repeat play on the DivX menu screen: SLOW PLAY PAUSE OSD TUNING STOP TUNING FUNCTION MENU PBC Whilst a disc is playing, press the REPEAT button. Each time the button is pressed, the repeat play mode changes in the following order. PRESET TV screen Unit display “SHUFFLE” “SHUFF” Randomly repeat play the tracks. “SINGLE” No display No repeat the currently playing track.
MP3/WMA, JPEG and DivX disc operation (continued) TV screen Unit display “SHUFFLE” “SHUFF” “SINGLE” No display “REPEAT ONE” “REP 1” “REPEAT ALL” “REP” “REPEAT OFF” No display Randomly repeat play the tracks (images). No repeat the currently playing tracks (images). Repeat the currently playing track (image). Repeat play all the tracks (images) in the disc. Rotating a picture You can rotate images. During playback, press the ; or : button. The image rotates as shown below.
USB memory device operation 1 2 Plug in USB memory device to unit and wait for a statement “Press FUNCTION to select device” appear on the TV screen. After that press FUNCTION button until “WAITING” appear on TV screen and main unit. After menu screen appear, press 8, 9, ; or : button to select a folder or a track and then press the ENTER or PLAY/PAUSE button. ... Indicates folders. ... Indicates MP3 data. ... Indicates WMA data. ... Indicates JPEG data. Playback starts when you select a track.
HT-CN650DVW Listening to the radio Manual or Auto tuning 1 Press the ON/STAND-BY button to turn the power on. 2 Press the FUNCTION button repeatedly to select tuner mode.
HT-CN650DVW To recall a memorised station 1 2 3 Perform steps 1 - 3 in “Manual or Auto tuning” on page 44. Press the PROG button to enter the preset tuning saving mode. Press the Direct Number buttons to select the preset channel number. TRK PRESET CHP SLEEP RS KHz MHz TITLE TRK STEREO VCD MP3 CHP PROG SLEEP or PRESET button to select the desired F REPEAT 1 A - B TITLE R KHz MHz Preset channel You can use the Direct Number buttons.
HT-CN650DVW Enjoying various sounds DTS or Dolby Digital Surround DTS (Digital Theatre Systems) Enjoy DTS or Dolby Digital sound in 5.1 or 2-channel. Whilst a disc is playing, press the LISTENING button repeatedly to select the desired listening mode. Digital input from discs with this trademark One of the digital audio systems for theatrical use. As the sound quality is emphasised, you can enjoy the realistic sound effect in the home theatre system. 5.
HT-CN650DVW Dolby Pro Logic Surround You can produce 2-channel stereo signals on tuner, audio CD, video CD, or AUX from all the speakers, or switch to 2-channel. Whilst a disc is playing, press the LISTENING button repeatedly to select the desired listening mode. Unit display You can switch the audio whilst playing the disc of multiple types (Dolby Digital, DTS, etc.) (page 36). When the listening mode is set to stereo, the same monaural sound is reproduced in both the right and left channels.
HT-CN650DVW Adjusting channel delay/speaker level When speakers cannot be placed at equal distances, change speaker settings to enjoy surround effects as if they were equally placed. Example: If the centre speaker is closer to the listening position than others by about 90 cm, set as follows. Sound from the centre speaker needs to be delayed for 90 cm. The delay time of 1 ms corresponds to 30 cm. Sound is heard as if all the speakers were equally placed.
HT-CN650DVW Test tone Speaker level setting You can check the sound output from the speakers. If sounds from the speakers are uneven, you can equalise them by adjusting the speaker levels. Press the FUNCTION button to select DVD mode. Press the SETUP button. Press the ENTER button. Press the 9 button to select “SPEAKER SETUP” and then press the ENTER button. 6 Press the - button and use the 8 or 9 button to select “TEST TONE ON”. 7 Press the ENTER button.
HT-CN650DVW Sleep operation Setting the sleep timer You can set the unit to the power stand-by mode at the specified time. ON STAND-BY ON STAND-BY PRESET OPEN CLOSE MUTE 1 2 Playback the desired sound source. Press the SLEEP button. TV screen PRESET SLOW PLAY PAUSE OSD TUNING STOP TUNING Unit display Sleep 120mins SLEEP To change the sleep time: Press the SLEEP button repeatedly to select the desired sleep time. The time will decrease as follows.
Playing karaoke HT-CN650DVW 6 E Adjust microphone volume by pressing MIC button and then press VOLUME + or VOLUME – button. To obtain the desired musical pitch (key control) F Press the Key Control button to obtain the desired musical pitch.
HT-CN650DVW Troubleshooting chart Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorised SHARP dealer or service centre. General Symptom No sound is heard. References - Troubleshooting chart - The sounds from speakers are not well balanced. Noise is heard during playback. When a button is pressed, the unit does not respond. Interference or noise occurs on the TV image.
HT-CN650DVW Tuner If trouble occurs The preset channel cannot be recalled. Is the unit placed near the TV or computer? Is the FM aerial placed properly? Move the aerial away from the AC power lead or the unit if located near. Did you remove the plug from the wall socket, or did a power failure occur? Set the channel again. Reference page − If such a problem occurs, do the following: P. 13 P.
HT-CN650DVW Error indicators and warnings Maintenance When you load an unplayable disc or fail to perform operations properly, the following messages are displayed on the unit and the TV screen. Unit display TITLE TRK PRESET CHP PROG SLEEP REPEAT 1 A - B KHz MHz References - Error indicators and warnings / Maintenance - TITLE TRK PRESET CHP PROG SLEEP REPEAT 1 A - B KHz MHz 3 TV screen NO DISC WRONG REGION Meaning The disc is not loaded.
Specifications Power source Power consumption Dimensions Weight Audio input terminals Audio output terminals Video output terminals HDMI output terminal Karaoke Mic terminal AC 220 - 240 V ~ 50/60 Hz Power on: 120 W Width: 430 mm (17-1/8") Height: 55 mm (2-3/8") Depth: 365 mm (14-3/8") 4.1 kg (8.6 lbs.
HT-CN650DVW Specifications (continued) Centre speaker Tuner Frequency range FM: 87.5 - 108 MHz Front speakers Full range speaker system (magnetic shield) 7.6 cm (3") speaker 2.0 cm (5/64") super tweeter Maximum input power 100 W Impedance 4 ohms Dimensions Width: 95 mm (3-47/64") Height: 150 mm (5-29/32") Depth: 95 mm (3-47/64") Weight 0.7 kg (1.5 lbs.)/each - Specifications - References Type Surround speakers Type Full range speaker system 7.6 cm (3") speaker 2.
HT-CN650DVW MEMO E F S V I N P E 57 03/10/29 HTCN650DVW_AUS.
HT-CN650DVW MEMO 58 03/10/29 HTCN650DVW_AUS.
HT-CN650DVW E F FOR LOCATION ENQUIRIES WITHIN FOR LOCATION ENQUIRIES WITHIN AUSTRALIA NEW ZEALAND REGARDING YOUR LOCAL REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE SHARP APPROVED SERVICE CENTRE VISIT OUR WEBSITE AT VISIT OUR WEBSITE AT www.sharp.net.au www.sharp.net.
HT-CN650DVW WARRANTY Consumer Electronic Products Congratulations on Your Purchase! This Sharp product is warranted against faults in materials and manufacture for a period of twelve(12) months from the date of original purchase. If service is required during the warranty period, please contact your nearest Sharp Approved Service Centre. These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.
