Specifications

13
HTCN650DVW_AUS.fm03/10/29
F
S
V
I
N
P
E
E
HT-CN650DVW
System Connections
- Speaker connection / Aerial connection -
 Connecting speaker wires
To prevent accidental short circuits between and terminals, connect the
speaker wires to the speakers first and then to the unit.
Aerial connection
External FM aerial:
Use an external FM aerial if you require better reception. Consult your dealer.
Make sure to leave the AC power lead disconnected when connecting the
speakers.
Caution:
 The supplied speakers for HT-CN650DVW is designed exclusively for
HT-CN650DVW. Do not connect speakers for HT-CN650DVW to other equipment.
Also, do not connect other speakers to HT-CN650DVW. It may cause malfunction.
 Do not mistake the and , and right and left terminals of the speaker wires. (The
right speaker is placed on the right when you face the unit.)
 Do not let the bare speaker wires touch each other.
 Do not stand or sit on the speakers. You may be injured.
 Do not short-circuit the speaker wires. If the power is
turned on, malfunction may occur.
 When disconnecting the speaker wires, unplug the AC
power lead, and then disconnect the speaker wires from
the main unit.
Black
()
1 Connect the wires to the speakers.
2 Connect the other end to the main
unit.
Red
(+)
Red
(+)
Red
Black
()
Black
Incorrect
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS
socket and position the FM aerial wire in the
direction where the strongest signal can be
received.
Note:
Placing the aerial on the unit or near the AC
power lead may cause noise pickup. Place the
aerial away from the unit for better reception.
FM aerial
External FM aerial