Specifications

17
HTCN650DVW_AUS.fm03/10/29
F
S
V
I
N
P
E
E
HT-CN650DVW
System Connections
- Connections to TV, VCR, etc. -
To listen to TV or VCR sound via the speakers of this unit:
 Audio connection to other equipment
 Connecting the AC power lead
After checking all the connections have been made correctly, plug the AC power lead
of this unit into the wall socket.
Notes:
 Plug the AC power lead into the wall socket, after any connections.
 Unplug the AC power lead from the wall socket if the unit will not be in use for a
prolonged period of time.
 Use only the supplied AC power lead. Using other power leads may cause an
electric shock or fire.
AC Plug Adaptor
In areas (or countries) where a wall socket as shown in illustration is used, connect
the unit using the AC plug adaptor supplied with the unit, as illustrated. The AC plug
adaptor is not included in areas where the wall socket and AC power plug can be
directly connected (see illustration ).
Note:
An AC plug adaptor is not supplied if the lead has an Australian Standard plug.
Press the FUNCTION button repeatedly to select the desired audio
input.
Unit display
 “AUX 1” or “AUX 2”.
Notes:
 Change the TV input in accordance with the connected socket.
 Do not connect other equipment (VCR, etc.) between the TV and this unit.
Pictures may be distorted.
 Refer to the operation manual of the equipment to be connected.
 Insert the plugs fully to avoid fuzzy pictures or noise.
ON STAND-BY OPEN CLOSE
PRESET MUTE PRESET
OSDPLAYSLOW
TUNING TUNINGSTOP
P
AUSE
SETUP
ENTER
FUNCTION
FUNCTION
A-B REPEAT 1SLEEPPROGCHPESET
KHz
MHz
To audio
input socket
MD recorder
Audio signal
Audio cable
1
2
Wall socket
(AC 220 ~ 240 V, 50/60 Hz)
2
1