Specifications

30
HTCN650DVW_AUS.fm03/10/29
HT-CN650DVW
DVD Operation
- Basic operation -
Basic operation (continued)
To change the programmed contents:
Repeat the above procedures from step 1.
Programmed contents will be cleared when you perform the following
operations:
Switch the input or remove the discs.
Set to the stand-by mode.
To start playback from the desired point (di-
rect play)
To select and play the desired title and chapter:
In the stop mode
In the playback mode
Notes:
Direct play feature is disabled on some discs.
Some discs may not display the chapter number.
With DVDs, you can specify the desired point only in the current title and not in
another title.
To play by specifying time (time search):
You can playback from the desired point by specifying the time.
In the playback mode
Notes:
Some discs cannot play from the specified point.
Time search feature is disabled on some discs.
2 Enter title or chapter number with the Direct Number buttons.
To specify title or track 1, enter “01” (must use 2 digits).
If you enter the wrong numbers, press , or 9 button to select the concerned
track and then re-enter the new numbers.
To clear all the numbers those entered, press 9 button to select “Reset” and
then press ENTER button.
3 Press 9 button to select “Start” and then
press ENTER button to start playback the
programmed track(s).
TV screen
1 Whilst in the stop mode, press the DIRECT button.
TV screen
2 Within 10 seconds, enter the title number first then only can enter
the chapter number by using the Direct Number buttons. You can
also press
; or : button at this time for title or chapter selection.
Example:
To select title or chapter 1: Press “01”.
To select title or chapter 12: Press “1” and “2”.
To select title or chapter 22: Press “2” and “2”.
TT: 01 CH: 02
TT: 02 CH: 02
TT: CH:
TT: CH:
TT: CH:
TT: CH:
TT: CH:
TT: CH:
TT: CH:
TT: CH:
Reset
Start
Exit NEXT
1
2
3
4
5
6
7
8
9
10
TITLE 01/02 CHAPTER 001/002
1
Whilst in the playback mode, press the DIRECT button.
TV screen
2
Select the title or chapter by pressing the 8 or 9 button and press the
ENTER button.
3
Enter the title or chapter number using the Direct Number buttons.
To select chapter 1: Press “0” and “1”.
To select chapter 12: Press “1” and “2”.
Playback starts after you complete enter the number(s) (bottom).
4
Press the DIRECT button to return to the actual size of image
(standard screen).
1
Whilst in the playback mode, press the DIRECT button.
TV screen
2
Press 9 or 8 button to select “TT Time” then press the ENTER button.
3
Specify the time with the Direct Number buttons.
To specify 1 hour 23 minutes and 40 seconds, enter “12340”.
If you enter the wrong number, start over from step 1.
Playback starts after you complete enter the number(s) (on the bottom of column).
4
Press the DIRECT button to return to the actual size of image
(standard screen).
Bitrate 15
Total Elapsed 0:03:42
Track
Disc Time
Track Time
Repeat
01/01
0:49:59
O:49:59
Off
TT Time 1:23:40