Specifications

39
HTCN650DVW_AUS.fm03/10/29
F
S
V
I
N
P
E
E
HT-CN650DVW
CD, CD-R and CD-RW Operation
- CD operation -
CD operation
The following playback functions are the same as DVD or VCD
operations.
Page
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
To locate the beginning of a chapter (track) (skip) . . . . . . . . . . . . . . . . . . . . . . .29
Fast forward/Fast reverse (search) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
To play repeatedly (repeat play) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
To play the contents between the specified points repeatedly (A-B repeat) . .34
To change the display on TV screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
 To play in the desired order
(programmed play)
You can playback the desired tracks in a specific order.
Maximum of 20 tracks can be programmed.
To change the programmed contents:
Repeat the above procedures from step 1.
Programmed contents will be cleared when you perform the following
operations:
 Switch the input or remove the discs.
 Set to the stand-by mode.
Notes:
 Sequential programming does not work if the disc disables programming or does
not have track information.
 During programmed play, repeat play can be performed by pressing the REPEAT
button (see page 33).
 To start playback from the desired point (di-
rect play)
To select and play the desired track:
To play by specifying time (time search):
Notes:
 Direct play feature is disabled on some discs.
 Some disc cannot play from the specified point.
 Time search feature is disabled on some discs.
1 Whilst in the stop or playback mode, press
the PROG button.
2 Enter a track number with the Direct
Number buttons.
 If you enter the wrong number, press 8 or 9
button to select the concerned track and then re-
enter the correct number.
 To clear all the numbers those entered, press 9
button to select “Reset” and then press ENTER
button.
ON STAND-BY OPEN CLOSE
PRESET MUTE PRESET
OSDPLAYSLOW
TUNING TUNINGSTOP
P
AUSE
TITLE
SETUP
ENTER
FUNCTION
MENU
PBC
RETURN
LISTENING
EQUALIZER PROG
MODE
MIC
ECHO
VOLUME
ANGLEZOOMSUBTITLEAUDIO
SLEEP DIRECT REPEAT A-B
123
456
78
0
9
123
456
78
0
9
1
2
3
4
5
6
7
8
9
10
Exit
Reset
Next
1
2
3
4
5
6
7
8
9
10
Exit Start
Reset
Next
04
10
12
3 Press 9 button to select “Start” and then press ENTER button to
start playback the programmed track(s).
Whilst in the stop or playback mode, press the Direct Number buttons
to select the track number.
To select track 14: Press “1” and “4”.
TV screen Unit display
1 During stop or playback mode, press the DIRECT button
repeatedly until “DISC GO TO” appear on TV screen.
2 Specify the time with the Direct Number buttons.
 Enter minutes and seconds.
 To specify 1 hour 23 minutes and 40 seconds, enter “8340”.
 If you enter the wrong number, start over from step 1.
SELECT TRACK: 14
DISC GO TO: __:__
TV screen