Specifications

48
HTCN650DVW_AUS.fm03/10/29
HT-CN650DVW
Advanced Features
- Adjusting channel delay/speaker level -
Adjusting channel delay/speaker level
When speakers cannot be placed at equal distances, change speaker settings to
enjoy surround effects as if they were equally placed.
Example:
If the centre speaker is closer to the listening position than others by about 90 cm, set
as follows.
 Channel delay setting
Sound from the centre speaker needs to be delayed for 90 cm. The delay time of 1
ms corresponds to 30 cm. Sound is heard as if all the speakers were equally placed.
1 The centre speaker is closer to the listener than others. In “Speaker level setting”,
adjust the centre speaker level (see page 49).
2 In “Test tone”, check the sound from each speaker (see page 49).
110 cm
200 cm
090 cm
Front
speaker (left)
Subwoofer
Front
speaker (right)
Surround
speaker (left)
Surround
speaker (right)
Centre
speaker
ON STAND-BY OPEN CLOSE
PRESET MUTE PRESET
OSDPLAYSLOW
TUNING TUNINGSTOP
PAUSE
TITLE
SETUP
ENTER
FUNCTION
MENU
PBC
RETURN
LISTENING
EQUALIZER PROG
MODE
MIC
ECHO
VOLUME
123
456
78
0
9
ENTER
ON STAND-BY
FUNCTION
SETUP
MODE
1 Press the ON/STAND-BY button to turn the power on.
2 Press the FUNCTION button to select DVD mode.
3 Press the SETUP button.
4 Press the / or - button to select “AUDIO SETUP PAGE” and then
press the ENTER button.
5 Press the 8 or 9 button to select
“CHANNEL DELAY” and then
press the ENTER button.
6 Press the 8 or 9 button to select the desired speaker type.
7 Press / or - button to select the desired distance.
8 To complete the channel delay setting, press the SETUP button.
Audio Setup Page
S
p
e
a
k
e
r
S
e
t
u
p
SPDIF Setup
Dolby Digital Setup
Channel Delay
10 cm
Center