Specifications

9
1
7
6
5
4
3
2
1
9
2012 September 5
HT-SB60
E-14
Periodically wipe the cabinet with a soft cloth.
Caution:
● Do not use chemicals for cleaning (petrol, paint thinner,
etc.). It may damage the cabinet finish.
● Do not apply oil to the inside of each component. It may
cause malfunctions.
When you fail to perform operations properly, the following
messages are displayed on the sound bar.
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification changes
for product improvement without prior notice. The
performance specification figures indicated are nominal
values of production unit. There maybe some deviations
from these values in individual unit.
Display Meaning
(Display blinks)
● When there is no input signal.
Play back the connected
equipment.
● Nonstandard signal. Cannot
be recognized.
● Signals other than DOLBY
DIGITAL, DTS, Linear PCM
cannot be recognized.
● Poor connection of the digital
audio input terminal.
● Turn off the sound bar and
check if the cable is
connected properly.
Demo indicator
(blinks red)
● When the protection circuit is
activated.
Maintenance
Cleaning the cabinet
Error indicators and warnings
Power source AC 220 - 240 V ~ 50/60 Hz
Power
consumption
Power on: 38 W
Power standby: 0.4 W
Dimension Width: 1385 mm
Height: 73 mm
Depth: 68 mm
Weight 3.6 kg
Output power MPO: 160W (80W + 80W) (10% T.H.D.)
RMS: Total 160 watts
RMS: 160 W (80 W + 80 W) (10% T.H.D.)
RMS: 120 W (60 W + 60 W) (1% T.H.D.)
Output
terminal
HDMI™ output: (audio/video support up
to 1080p) x 1
Input terminal analogue input (AUDIO IN): x 1
500 mV / 47 kohms
Optical digital input (OPTICAL):
Square type x 1
HDMI input: (audio/video support up to
1080p) x 2
Type 2 Way speaker system
5.7 cm woofer
2.5 cm Soft Dome
Maximum
input power
160 W
Rated input
power
80 W
Impedance 4 ohms
Power source AC 220 - 240 V ~ 50/60 Hz
Power
consumption
33 W
Output power MPO: 150W (10% T.H.D.)
RMS: 150 W (10% T.H.D.)
RMS: 120 W (1% T.H.D.)
Type Subwoofer system
16 cm woofer
Maximum
input power
300 W
Rated input
power
150 W
Impedance 3 ohms
Dimensions Width: 144 mm
Height: 430 mm
Depth: 306 mm
Weight 6.1 kg
Specifications
Sound Bar
Subwoofer