Operation Manual

EN
ARC mode:
HDMI Input HDMI Output COAX IN R-AUX IN-L OPTICAL DC IN
HDMI Input
HDMI Output
DVD
The ARC (Audio Return Channel) function allows you to send audio
from your ARC- compliant TV to your sound bar through a single HDMI
connection. To enjoy the ARC function, please ensure your TV is both
HDMI-CEC and ARC compliant and set up accordingly. When correctly set
up, you can use your TV remote control to adjust the volume output (VOL
+/- and MUTE) of the sound bar.
Connect the TV HDMI ARC input and the soundbar HDMI output with the
HDMI cable (not included).
Note: In Optical In mode, Coaxial In mode, ARC mode or HDMI mode, the
source has to be set to PCM audio output
Note: If there is no signal input, the product will enter the standby after 15
minutes (All modes)
Connect to Power
Before connecting the power adapter, ensure you have completed all other
connections.
Connect the power adapter to the DC Socket of the unit and then into a
mains socket.
Installing the app
Download and install the sharp player app to your
iOS or Android device by searching “Sharp Player”
in the “Apple App Store” or “Google Play Store”.
Alternatively you can scan QR code on the last
page of this manual.
After the app is succesfully installed on your
device, you will need to setup the Wi-Fi
connection of the soundbar. This can be carried
out via the web interface or via Sharp Player app
directly.
Wi-Fi connection setup via web
1. When you turn on the soundbar, Wi-Fi will automatically start.
2. After PC or smart phone connects to this device through Wi-Fi(The
default SSID is HT-SBW420_XXXX, XXXX is a random number), you can
access the site: http://10.10.10.254 and enter the setting page. There
are two tabs: Wi-Fi and Setting.
3. Wi-Fi tab: To setup the connection between Wi-Fi speaker and AP. You
can use PC or smart phone to access internet through Wi-Fi speaker
after connected.
4. Setting tab:
There are 3 sub tabs in setting tab: Status, System and Network.
1. Status tab: You can view the  rmware version, UUID of Wi-Fi
speaker.
2. System tab: You can reset the Wi-Fi speaker and local upgrade
 rmware in “Other” option and online upgrade  rmware in
“Firmware Online Upgrade”.
3. (Network tab: You can set the SSID, password and encryption type
of Wi-Fi speaker.
Wi-Fi connection setup via app