Operation Manual

EN
device upgrade process  nishes without other operations .
Troubleshooting
No power
• Ensure that power adapter is properly connected.
• Ensure that there is power at the AC outlet.
• Press standby button on the remote control or soundbar to turn the
soundbar on.
No sound
• Increase the volume. Press Volume Up on the remote control or on the
right side of the soundbar.
• Press MUTE on the remote control to ensure the soundbar is not muted.
• Press source buttons to select a di erent input source.
• When using either of the Digital input, if there is no audio:
Try setting the TV output to PCM or
Connect directly to your Blu-ray/other source, some TVs do not pass
through digital audio.
• Your TV may be set to variable audio output. Con rm that the audio
output setting is set to FIXED or STANDARD, not VARIABLE. Consult your
TV’s user manual for more detailed information.
• If using Bluetooth, ensure that the volume on your source device is
turned up and that the device is not muted.
Remote control does not work
• Before you press any playback control button,  rst select the correct
source.
• Reduce the distance between the remote control and the unit.
• Insert the battery with its polarities (+/-) aligned as indicated.
• Replace the battery.
• Aim the remote control directly at the sensor on the front of the unit.
I hear buzzing or humming
• Ensure all cables and wires are securely connected.
• Connect a di erent source device (TV, Blu-ray player, etc) to see if the
buzzing persists. If it does not, the problem may be with the original
device.
• Connect your device to a di erent input on the soundbar.
Wi-Fi mode without sound
• Check whether the PC or smart phone and soundbar are in the same
network or not;
• Check whether the soundbar is in Wi-Fi mode or not;
• If using the app, please check whether the music is sent to the speaker
or not;
Forget Wi-Fi password
• Clear Wi-Fi preset password,
• Boot status, press the remote control button in sequence: PLAY/PAUSE,
NEXT, PREVIOUS, VOL-
Connection is lost periodically during Wi-Fi mode playback
• Ensure your Wi-Fi device is not in the Power Saving / Stamina mode.
• If the Power saving mode is required for your Wi-Fi device, please add
the “Sharp Player” app to the devices exceptions. To add the app to your
exceptions list, follow the instructions for your chosen device.
Technical speci cation
Model HT-SBW420
Sound Bar
Power Consumption 33 W
Power Consumption (Standby) <0.5W
Power Consumption
(Networked standby)
<2.5W
Output Power 2x 18 W + 36W (RMS)
Frequency Response 70Hz-20KHz(-10dB)
Power Adapter
Manufacturer Shenzhen Fujia Appliance Co., Ltd.
Model FJ-SW2401500N
Input AC 100-240V~50/60Hz
Output DC 24V,1.5A
Bluetooth
Version V 2.1 EDR
Maximum power transmitted <10 dBm
Frequency bands 2402 MHz ~ 2480 MHz
Wi-Fi
Support 802.11 b/g/n; STA/AP/AP Client
Maximum power transmitted <20 dBm
Frequency bands 2412 MHz ~ 2472 MHz
Remote Control
Battery Type 2 x AAA 1,5V
100,0cm
3,7kg
12,2cm
5,2cm