Owner`s manual

FREE DIVE MODE

When Free Dive Mode is selected as the operating mode, the ZEN will operate with select

features. Nitrogen loading is calculated based on a default FO2 of AIR and the amount

remaining during 24 hours is carried over between FREE and NORM operating modes.

• To access Free Dive Operating mode while viewing the Watch Default Time screen,

press the M button 3 times (2 seconds each time), or while the Gauge Surface Main

screen (no Gauge dive was made), press the M button 1 time for 2 seconds.

• The graphic FRE will ﬂash indicating that it can be selected as the operating mode.

• To select it, press and release the M button momentarily (< 2 sec). The graphic

becomes solid and Free mode is selected for the dives to be conducted.

WATCH TIME >> NORM SURF >> GAUG SURF >> FREE SURF

Free Surface Main information includes (Fig. 92) -

> Graphic FRE

> Graphic tot with Total number of repetitive Free dives

conducted in that series with # icon (below)

> Surface Interval after the most recent dive (min:sec to 59:59,

then hr:min) with clock/wave icon (above next to FRE)

> Battery icon if a Low Battery condition exists

• Press and release the M button momentarily (< 2 sec) to

access the Watch Default Time screen.

• Press the L button to activate the Backlight.

Fig. 92 - FREE SURF MAIN