Owner`s manual

11
OPERATING MODE STRUCTURE
Unless it is operating in Dive Computer mode, the ZEN will be
ON in the default WATCH MAIN TIME (home time) mode (Fig.
1), like a standard WATCH, until the Mode is changed.
The M button is used to access other modes that include Alter-
nate Time, Countdown Timer, Chronograph (stop watch/lap
timer), and Daily Alarm. It is also used to revert to the Local
Default Time display and access dive computer modes.
The screens of the Main and Sub modes will remain on display
until a button is pressed to access another screen or Mode, ac-
tivate a sequence, or for 2 minutes if no button is pressed. The
Chronograph remains on display as long as it is running unless
another mode is accessed.
When Wet Activation is set On, the ZEN will enter selected Dive
Mode upon descent to 5 FT (feet)/1.5 M (meters) for 5 seconds,
regardless of what operating mode it is in.
WARNING: When Wet Activation is set OFF,
the ZEN must be in Dive Surface Mode (NORM,
GAUG, or FREE) prior to the first dive of a new
series. Commencing a dive while in Watch
modes will not activate Dive Mode unless Wet
Activation is set ON.
Main Sequence
(while at home)
Main Time
Alternate Time
Countdown Timer
Chronograph
Daily Alarm
Alternate Sequence
(at a travel location)
Alternate Time
Main Time (home)
Countdown Timer
Chronograph
Daily Alarm
Fig. 1 - MAIN TIME