Owner`s manual

114

CARE AND CLEANING

Protect your ZEN from shock, excessive temperatures, exposure to chemicals, and tamper-

ing. Protect the lens against scratches with an instrument lens protector.

• Soak and rinse the ZEN in fresh water at the end of each day of diving, and check

to ensure that the areas around the Low Pressure (Depth) Sensor (Fig. 111a), PC

Interface Data Port (Fig. 111b), and Buttons are free of debris or obstructions.

• To dissolve salt crystals, use lukewarm water or a slightly acidic bath (50% white

vinegar/50% fresh water). After removal from the bath, place the ZEN under gently

running fresh water and towel dry before storing.

• Transport your ZEN system cool, dry, and protected.

INSPECTIONS AND SERVICE

Your ZEN should be inspected annually by an Authorized TUSA

Dealer who will perform a factory prescribed function check and

inspection. To keep the product warranty in effect, this inspec-

tion must be completed one year after purchase (+/- 30 days).

TUSA recommends that you continue to have an inspection

performed every year to ensure it is working properly. The costs

of annual inspections are not covered under the terms of the 2

year limited warranty.

To Obtain Service:

Take your ZEN to an Authorized TUSA Dealer.

Fig. 111 - CASE BACK