Owner`s manual

128
Battery Indicator:
• Warning - icon on solid at 2.75 volts, Battery change recommended
• Alarm - icon on ashing at 2.50 volts, change the Battery
Dive Computer Mode Activation:
• Manual - push button (recommended), required if Wet Activation is set OFF.
• Automatic - by immersion in water (if set ON)
• Cannot be manually activated deeper than 4 FT (1.2 M), if Wet Activation is set OFF.
• Cannot operate as a Dive Computer at elevations higher than 14,000 feet (4,270 meters)
• Reverts to Watch Default Time if no dive is made within 2 hours after entry into a Surface Mode.
• Reverts to Watch Default Time 10 minutes after dive.
Operating Temperature:
• Out of the water - between 20 °F and 140 °F (-6 and 60 °C).
• In the water - between 28 °F and 95 °F (-2 and 35 °C).
• At extremely low temperatures, the LCD may become sluggish, but this will not affect it's accuracy. If stored or
transported in extremely low temperature areas (below freezing), you should warm the unit and its battery with
body heat before diving.
Storage Temperature:
• Out of the water (in storage case provided) - between 14 °F and 158 °F (-8 and 70 °C).
PC requirements:
• IBM
®
, or compatible, Personal Computer with Mouse, USB Port, CD drive, and printer
• Intel
®
Pentium 200 MHz or better microprocessor
• Microsoft
®
Windows
®
98 Second Edition, ME, NT, 2000, XP, or Vista
• Super VGA card or compatible video graphics adaptor (256 color or greater) with a minimum 800 X 600 pixel
screen area of display settings
• 20MB of available hard drive storage
• 16MB of available RAM
SPECIFICATIONS (CONTINUED)