Owner`s manual

PC INTERFACE

Interface with a PC is accomplished by connecting the ZEN to

a PC USB Port using a special USB Interface Cable available as

an optional accessory. The same Cable is used for Upload and

Download.

The software program is on a CD, also an accessory, together

with a USB Driver. The program's Help serves as the user

manual and can be printed for personal use. The Settings Up-

load program is used to check the ZEN's existing Settings and

for entering Time, Alarm, and Dive Computer settings into the

ZEN. The Data Download program is used to retrieve Data that

was sampled during dives and stored in the ZEN's memory.

The ZEN checks for an External Access request once every sec-

ond while in the Watch Main Time. Checks are not made if the

unit is wet. For a connection to be made, the Interface Cable

is clipped onto the ZEN's Data Port and plugged into a PC USB

Port. To establish the connection, the PC program must be run-

ning. When the connection is made, a PC screen appears on

the ZEN displaying the graphic PC and a 2 minute countdown

or until completion of the Upload or Download operation.

• The ZEN reverts to the Watch Main Time screen after

completion of the Upload or Download operation, or after

the 2 minute countdown.

Fig. 5 - PC

(during upload/download)