Owner`s manual

WATCH CDT (COUNTDOWN TIMER)

Pressing and releasing the M button momentarily 2 times (< 2

sec each time) while the Watch Default Time screen is displayed

will access the Watch CDT status screen, displaying the remain-

ing Countdown Time (hr:min) if running (Fig. 16A), or OFF ﬂash-

ing and the previously set Countdown Time if the set Countdown

started and has ended, or OFF (solid) and 0:00 if no time was

previously set (Fig. 16B).

Once set ON, a Countdown will run in the background until it

counts down to 0:00, or it is set OFF, or a Dive is made at which

time it will default to OFF and the value previously set.

When a set Countdown Time reaches 0:00, the Audible Alarm

will sound.

• Pressing and releasing the S button (< 2 seconds) will

toggle between ON and OFF. Note that a toggle to ON

will Start the Timer if a Time has been set.

• Depressing the A and S buttons simultaneously for 2

seconds will access Set Watch CDT.

• Pressing the L button will activate the Backlight.

• Depressing the M button for 2 seconds will revert to the

Watch Default Time screen.

• If no button is pressed during a period of 2 minutes,

operation will revert to the Watch Default Time screen.

Fig. 16B - CDT STATUS

(no time set)

Fig. 16A - CDT STATUS

(running)