Owner`s manual

Set Watch CDT

Upon access, the Set CDT screen displays the graphics CDT and

SEt and the CDT (hr:min) with clock icon, the Hour Set Point

ﬂashing (Fig. 17A).

• Depressing the S button will scroll upward through the Hour

Set Points in 1 hour increments at a rate of 8 per second.

• Pressing and releasing the S button momentarily and

repeatedly (< 2 sec each time) will step upward through the

set Points one at a time.

• Pressing and releasing the A button momentarily (< 2 sec)

will save the Hour Set Point and the Minutes digits will

ﬂash.

• Depressing the S button will scroll upward through the

Minute Set Points in 1 minute increments at a rate of 8 per

second.

• Pressing and releasing the A button momentarily (< 2 sec)

will save the Minutes Set Point and revert to the CDT Status

screen with the graphic OFF (ﬂashing) in place of the

graphic SEt (Fig. 17B).

• Pressing and releasing the S button momentarily (< 2 sec)

will toggle from OFF to ON and Start the Timer.

• Depressing the M button for 2 seconds will revert to the

Watch Default Time screen.

• If no button is pressed during a period of 2 minutes,

operation will revert to the Watch Default Time screen.

Fig. 17A - SET WATCH CDT

Fig. 17B - CDT STATUS

(set, ready)